TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer

Installing your project or product into a USB interface is simple when you use the TTL FTDI Transmitter USB For 3.3V 5V Dual Power FT232RLFTDI MWC Programmer. A product from SI Labs, the cs2102 has communication capabilities (the Arduino multiview 2.5, for instance, is identical to the GPS in the APM pack and any other).

The computer receives a USB port from a device that has a TTL port. Through the installation of the driver software and connecting the converter to the computer, a virtual serial port that is compatible with Linux, MAC, and Windows operating systems is added to the computer’s ports. This converter has an output voltage of 5 volts and 3.3 volts in addition to the TXD, RXD, and GND pins.

A high-quality, high-performance USB-to-Serial Bridge Controller, based on the FT232RL, that converts USB to TTL. This chip was made by a renowned producer of USB/TTL converter goods. The newest addition to FTDI’s lineup of integrated circuit devices with USB UART interface is the TTL USB.

With this TTL FTDI Transmitter USB for 3.3V 5V dual power FT232RLFTDI MWC Programmer board, Arduino development costs are reduced and user convenience is increased. The power output and IO level of the board can be set to either 3.3V or 5V using the jumper on the back of the board. To switch to 3.3V, you can cut the 5V default trace and add a solder jumper.

Applications of TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer

1. Programming of Arduino Pro Mini with Automatic RESET through DTR pin
2. Programming of Microcontrollers that can be programmed using serial bootloaders at 3.3V or 5.0V logic levels
3. Burn write STC MCU, NXP MCU, Renesas MCU, NEC MCU
4. Data exchange between microcontroller and Desktop or Laptop Computers
5. Connection with GPS Devices
6. Connection with various external Phones, or modems, GSM Modules
7. All other applications requiring USB/Serial/TTL interface.
8. Router, HDD, ADSL, broadband modem firmware upgrade
9. Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on
10. Simple UART communication commonly used UART debugging tools in supper terminal
11. USB signal transferred to TTL signal may be used by electronic enthusiasts
12. Two data transmission indicator can monitor data transfer status in real-time
13. 3.3V and 5V power supply interface, easy for the DDWRT of different voltage system that needs power.

Features :

1. Automatic detection of data transfer speeds up to 1Mbps
2. Data exchange capability with an external interface with UART protocol
3. Output Voltage 5v and 3.3v Indicator LEDs USB Connector
4. With RX and TX Indicator LEDs
5. Manage System for Reducing Flow In Idle and Standby Mode
6. Support for serial output devices such as modems, card reader devices, digital cameras and more.
7. Interface: Mini USB
8. +3.3V and +5.0V signal Level Support using SMD jumper.
9. Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
10. DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads