CP2102 (5-Pin) USB 2.0 To TTL UART Serial Converter

Description:

This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. Connect the module to any USB port of the computer, install drivers and you will be assigned a com port through which you can communicate as you go through a serial port. You can easily communicate with microcontrollers/microprocessors from your computer through the module. You can find tx, Rx, and GND points on a module. Connect it to TTL pins of microcontrollers for direct communication without db9 connector (no need to use max232 / max3232 for rs232 to TTL conversion in this case) supports Windows 8.1 / 8 / 7 / Vista / server 2003 / XP / 2000 / 98se / CE 6.0 / Ce 5.0 Supports mac os x / mac os 9 supports Linux 3.X.X / 2.X.X. Baud rates: 300 bps to 1 Mbps. Byte receives buffer: 640 bytes transmit buffer. Create a virtual com port and connect your old devices which use serial port communication compatible with both 3.3V and amp. 5v levels led to the indication of all handshaking and modem interface signals. Hardware or x-on/x-off handshaking supported. Event character support line break transmission. USB suspend states are supported via suspend pins. Temperature range: -40 to +85.

Specification:

• Using Serial Conversion Chip: CP2102
• Voltage: TTL compatible with 5V / 3.3V
• Operating Temperature: -40 ℃ ~ +85 ℃

Features:

• Included USB transceiver, without external circuit device
• Includes a clock circuit and power-on reset circuit
• With 3.3V and 5V dual power output
• With three LEDs: power indicator, data reception indicator, data transmission indicator, working status
• Meet the USB2.0 specification requirements
• SUSPEND pin supports USB suspend state
• With a self-recovery fuse. In the event of an accidental short circuit, it can effectively protect your computer USB port and Downloader
• With reset signal output, etc. directly to the Arduino board Pro mini download!
• Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
• The supported data format is 8 data bits, 1 stop bit, and parity bits
• Connotation 512 byte receive buffer and 512 bytes transmit buffer
• Supports hardware handshaking or X-ON/X-OFF