DJI NAZA M V2 Multirotor Autopilot Controller set with GPS

  1. Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
  2. Supported ESC Output 400 Hz refresh frequency
  3. Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
  4. Power Consumption MAX: 1.5 W (0.3 A at 5 V)
  5. Operating Temperature: -10 to 50°C

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%



  • Pick up from the IBOTS Store


  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days


  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year
  • Free Returns Policy

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area


Controller set for DJI NAZA-M V2 Multirotor Autopilot Using GPS The DJI NAZA-M V2 Multirotor Autopilot Controller kit supports nine different multirotor setups. As the brains of the aeroplane, GPS controls pilot input and interprets information from several sensors to support the maintenance of a stable flying condition. The system consists of four parts.

At the centre of the flight control system is the MC (main controller), which also houses the flight computer. The power management unit, or PMU, is the next component that controls the amount of power supplied to each of the four, six, or eight rotors. Lastly, a GPU receiver/compass combo is provided, enabling various functionality such as the Go Home failsafe and Intelligent Orientation Control (IOC).

The MC’s CAN-Bus ports let the Naza-M to communicate with several DJI accessories, such as the iOSD Module, the Ground Station System, and a gimbal control unit (GCU).


Compact All-In-One Multi-Rotor Autopilot System with New Smartphone Assistant Software
Accompanied Multiple Rotors Hex-rotors: I6, X6, IY6, Y6 Octo-rotors: I8, V8, X8 Free Ground Station Take-Off Assistance Vier-rotor: I4, X4
Several Flight Control Modes and Skillful Flipping
GPS Module Accessible for Precise Positional Control
Control of Intelligent Orientation (IOC)

Supports Arm/Disarm Modes for Safe Motor Starting and 2-Axis Gimbal Stabilisation for General, PPM, and S-Bus Receivers
Two Steps of Protection and Warnings for Low Voltage
Protection Against Single Motor Failure
ESC support Results 400 hertz refresh rate
Accepted Transmitters: PCM or radio operating at 2.4 GHz with minimum 4 channels
Supports Transmitter-Based Remote Gain Adjustment; Improved Failsafe Features, Including Auto Return-to-Home
Compatible with ZH4-3D/H3-3D Gimbals, Ground Station, iOSD, DJI Video Downlink, and Upcoming Products
Encourages Nine Different Multi-Rotor Configurations That Are Perfect for E Series Tuned Propulsion Systems and DJI F450/F550

System Requirements:
  1. Assistant Software Windows: 8, 7, XP SP3
  2. OS X: 10.6 or later
  3. Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
Flight Performance:
  1. Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
  2. Horizontal: ±8.2′ / ±2.5 m
  3. Max Angular Speed 200°/s
  4. Max Tilt Angle 35°
  5. Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
  6. Descent: 14.8 ft/s / 4.5 m/s

Customer Reviews

0 reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.