FS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder

Some intriguing new features are included with the FlySky FS-i6S Remote Control 2.4G 10CH AFHDS Transmitter with FS-IA10B Receiver, which has a new look. With its monochrome backlit LCD touchscreen, this radio is simple to programme and adjust in both daylight and low light.

In order to increase dependability, two internal dual omnidirectional high gain antennas are installed inside the frame to prevent damage during transit. There are numerous customisable switches, buttons, and scroll wheels to assist with controlling your aircraft. They are therefore excellent for configuring flight modes, and the scroll wheels can be employed to operate camera gimbals.

The product’s superior design and appearance convey a sense of quality, with well-placed buttons for quick access and seamless controls and functioning. Every switch and scroll wheel is easily accessible, and the sticks’ lengths may be adjusted for comfortable use. There is a mounting place for the phone/monitor holder and a loop where a neck strap can be fastened. Even your favourite simulator programmes can be easily connected via USB or updated using the micro USB port on your PC.

Every transmitter and every receiver has a distinct ID. Once paired, the transmitter and receiver will only talk with one another, keeping other systems from inadvertently connecting to it or interfering with its functionality. Every emitter alternates between 16 channels to minimise interference caused by other transmitters.

Features:

1. Full touchscreen interface: More convenient and faster to control Bidirectional Communication
2. Capable of sending and receiving data: Each transmitter is capable of receiving data from temperature, altitude, and many other types of sensors, servo calibration, and i-BUS Support.
3. Multi-channel Hopping Frequency: This system’s width ranges from 2.4055GHz to 2.475GHz. This is divided into 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
4. Omni-directional Gain Antenna: The high efficiency Omni-directional high gain antenna cuts down on interference while using less power and maintaining a strong reliable connection.
5. Unique ID Recognition System: Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting to or interfering with the system’s operation.
6. Low Power Consumption: The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one-tenth the power of a standard FM system, dramatically extending battery life.

Transmitter Schematic

Receiver Pin Diagram

Specifications:

Transmitter

Model: FS-i6s Transmitter Brand: FlySky

10 Channel
Type of Model: Quadcopter
Resolution of the channel: 4096 steps
Warning for low voltage: less than 4.2 volts; ANT length: 26 x 2 mm (dual antenna)
576g in weight (with mobile holder)
6 volt 1.5 AA x 4 batteries (not included)
179 x 81 x 161 mm in size

Silver in colour
CE and FCC certificates; RF specifications:

2.405 – 2.475 GHz is the RF range.
500 kHz bandwidth
RF Power: below 20 dBm
RF setting: AFHDS 2A
Type of modulation: GFSK RX Deafness: -105 dBm

Recipient:
Name Brand: Flysky
Receiver Model Number: FS-IA10B

There are ten channels.
Appropriate models: helicopter, glider, and aeroplane Well-being
Range of frequencies: 2.4–2.48 GHz
There are 160 newspapers.
Maximum transmit power of 20 dBm
Sensitivity of receiver: -105dBm
2.4G modes: second generation digital system with automatic frequency
Coding scheme: GFSK

The antenna length (dual antenna) is 26 mm * 2.
19.3 g in weight
Power input: 4.0–6.5 V DC

Specifications: 47 x 33.1 x 14.7 mm; Black colour
Certification: FCC i-BUS, CE0678 Interface: Certainly
Interface for data acquisition: Yes