Digispark ATTINY85 Mini USB Development Board ₹349.00
Back to products
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino ₹229.00
-37%
Click to enlarge

SmartElex ATmega32 Development Board on-board Programmer

  1. Onboard 5V regulator (78M05) circuit.
  2. On-Board power supply on-off switch
  3. Power Status LED (RED)
  4. User LED D0, D1 connected to any port pin through D0, D1 Jumper respectively.
  5. User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
  6. Onboard 12 MHz crystal
  7. Port extensions for all ports with detailed pin labeling for easy identification of pins
  8. Onboard USB TO Serial – CH340 Chip.
  9. On-board Micro USB USBASP for loading HEX file.
  10. Servo motor Connector (Run only up to 300mA).

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%

IBOTS1000

₹1,250.00

Compare
Add to wishlist
  • Pick up from the IBOTS Store

Free

  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹75

  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹125

  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹250

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year

More details

  • Free Returns Policy

More details

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area

Description

The AVR ATmega32 microcontroller’s capabilities can be assessed and demonstrated using the SmartElex ATmega32 Development Board. The AVR ATmega32 controller’s 40 pin DIP package is supported by the onboard MCU socket. This board is intended for general-purpose use.

ATMEGA 32 is intended to be used with the ATMEGA Project Board. A low-power CMOS 8-bit microcontroller built on the AVR enhanced RISC architecture is called the ATMEGA 32. With throughputs close to 1 MIPS per MHz, it can carry out complex instructions in a single clock cycle, enabling the system designer to optimize power usage.

The board features a circuit for the onboard power supply, a Micro USB port for the USBASP programmer, a power status LED (RED), a reset switch, a two-user switch, a two-user LED, and port extensions for all four ports. Power for the Board can be supplied using the DC plug-in connector. Any voltage between 9 and 12 VDC can be handled by the inbuilt power regulator.

Pin Description:

Pin Description

 

Customer Reviews

0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.