Emax BLHeli Series 30A ESC with Oneshot (Original)

BLHeli Series 30A ESC with Oneshot from Emax is made especially for first-person shooter races. A range of affordable, high-performance ESCs for drone motors is called the Emax series. For those who are new to drone building and wish to learn the craft, Emax’s ESCs are 100% guaranteed to be authentic and original.
The EMAX BLHELI SERIES 30A ESC is a speed controller for brushless DC motors. The ESC is using a 2-4S Lipo battery, which extends decent battery life, and this lower output resistance significantly increases power stability. The brushless DC motor is set to start by the EMAX BLHELI ESC. With a continuous current handling capacity of 30 A and a peak current of 40 A for the final 10 seconds alone, this ESC offers a higher current handling capacity.

You don’t need to worry about choosing the wrong ESC if you’re planning to build a drone; we’ve got you covered. We have everything you need at Ibots to get your drone idea off the ground.

Features: 
Perfect drive performance is achieved by further optimising the BLHeli firmware.
Protection against low voltage, overheating, and loss of throttle signal.
distinct power source for the BEC and MCU, improving the ESC’s capacity to get rid of magnetic interference.
A transmitter or programme card can be used to adjust the ESC’s parameters.
It is possible to adjust the throttle range to work with various receivers.
fitted with a switch- or linear-based built-in BEC.
Maximum speed for a 2-pole is 210,000 rpm, a 6-pole is 70,000 rpm, and a 12-pole is 35,000 rpm.