24V 250W motor kit w/t LI ion battery

This combo package comes with an E-bike controller that can drive motors up to 250 watts, a 224 V 250 W motor kit with a 24 V 8.8 Ah LI-ion battery, and a charger.

If you wish to build your own bespoke electric vehicle, such as an electric bicycle or scooter, this complete motor and controller combo is ideal. More low-end torque is produced by this gear-reduction electric motor than by any other type of motor. Because of its durability, it is also utilised in a plethora of projects involving e-cars, segways, and various robotics, including combat and ATV robots.

E-bike Controller incorporates under Voltage protection 24 Volts. The current limiting feature prevents controller and motor damage due to over-current conditions.

1. 24V 250W Motor: This is the motor that provides propulsion to your electric bike. It’s typically a brushless DC motor designed to be mounted on the wheel hub, providing assistance to your pedaling.
2. Lithium-Ion Battery: The lithium-ion battery is the power source for your electric bike. It provides the energy necessary to run the motor. Lithium-ion batteries are popular due to their high energy density, lightweight, and relatively long lifespan compared to other battery chemistries.
   • The capacity of the battery (measured in ampere-hours, Ah) will determine how far you can ride on a single charge.
   • The voltage of the battery should match the voltage requirements of the motor. In this case, it’s 24V.
3. Battery Management System (BMS): This is a crucial component of the battery pack. The BMS ensures the safe and efficient operation of the battery by monitoring its voltage, temperature, and current. It also provides features like overcharge and over-discharge protection.
4. Charger: The charger is used to recharge the lithium-ion battery when it’s depleted. It’s essential to use the charger provided with the kit or one recommended by the manufacturer to ensure compatibility and safety.
5. Controller: The controller regulates the power flow from the battery to the motor, controlling speed and acceleration. It also manages other functions such as regenerative braking (if supported) and safety features.
6. Throttle: The throttle allows the rider to control the speed of the electric bike by varying the power output of the motor. It’s usually a twist grip or thumb throttle mounted on the handlebars.
7. Wiring and Connectors: The kit will include all the necessary wiring and connectors to connect the motor, battery, controller, throttle, and any additional accessories.

Specification;

• Voltage: 24 Volt DC
• Output: 250 Watt
• Adaption motor: 24V 250W
• Ambient temperature: -20°C — 45°C
• Turn potential: 5V
• Brake potential: Low potential brake
• Dimensions: 7.5 X 5.3 X 2.1
• RPM (after Reduction) – 300
• Full load current – 13.4A
• No-load Current – 2.2A
• Undervoltage protection: 20.5V
• Current Limiting protection: 21.5A
• Torque Constant – 8 N.m (80 kg-cm)
• Torque stall – 40 N.m (400 kg-cm)
• Sprocket: 9Tooth only fits #410 bicycle chains
• For Chain Size: Pitch 0.5 inch
• Roller Diameter 0.3 inch
• Roller Width 0.16 inch

Controller Specifications:

• Voltage: DC 24V
• Under Pressure: 20V±1
• Current Limit: 21A ±1
• Level Brake: high/low
• Turn The Voltage: 1.1-4.3V
• Phase Angle: 60/120
• Power: 250W