CJMCU-123 WS2812 RGB LED Breakout Module

The CJMCU-123 RGB LED Breakout Module is this. In actuality, the WS2812 is an RGB LED with a WS2812 integrated right in! For ease of bread-boarding, every pin that is required is divided into headers spaced 0.1 inch apart. An addressable string or display can be created by connecting multiple of these breakouts in a chain.

With the integrated driver that comes with the LED, you may independently adjust its brightness and colour.

The circuit and RGB chip control of the intelligent LED light source control WS2811B are combined into a 5050 Components package. Intelligent digital door locks and signals remodel loop amplification drive are among its internal data.

Features :

1. The control circuit and the LED share the only power source.
2. Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point.
3. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
4. Built-in electric reset circuit and power lost reset circuit.
5. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
6. Cascading port transmission signal by a single line.
7. Any two points the distance more than 5m transmission signal without any increase circuit.
8. When the refresh rate is 30fps, cascade number is not less than 1024 points.
9. Send data at speeds of 800Kbps.
10. The color of the light was highly consistent
11. Full-color module, Full-color soft lights a lamp strip.
12. LED decorative lighting, Indoor/outdoor LED video irregular screen.