![](https://ibots.in/wp-content/uploads/2024/01/r-3-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/r1-3-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/r2-4-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/r3-3-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/r4-4-150x150.webp)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹1,540.00 ₹999.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G. This is a great solution to get your final project on the welding prototype board.
The Mega Pro Embed functionalities are identical to the Mega 2560. Even though it is an Embed board, it is solid as stable as the Mega Board. It uses the original chip, and 16 MHz high-quality quartz resonators are present on the board. The board uses the chip CH340G as the converter UART-USB. It provides a stable data exchange result when you work at a frequency of 12Mhz (which requires the driver to be installed on the computer).
You can power the board or power the pins through the Micro USB connector. The voltage regulator (LDO) can handle input voltages from 6V to 9V (peak 18V) DC. The voltage regulator allows to use of up to 18V as an input value, however, we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device.
Microcontroller | ATmega2560 |
Operating Voltage | 5V |
Input Voltage (recommended) | 6-9V |
Input Voltage (limit) | 12V |
Digital I/O Pins | 54 (of which 15 provide PWM output) |
Analog Input Pins | 16 |
DC Current for 5V Pin | 800 mA |
DC Current for 3.3V Pin | 800 mA |
Flash Memory | 256 KB of which 8 KB is used by the bootloader |
SRAM | 8 KB |
EEPROM | 4 KB |
Clock Speed | 16 MHz |
Built-in LED | 13 |
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No one rejects, dislikes.
It has survived not only.
All the Lorem Ipsum on.
All the Lorem Ipsum on.
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.