Naze32 6DOF Flight Control board Original price was: ₹1,999.00.Current price is: ₹1,320.00.
Back to products
Mini OSD FOR APM 2.6/2.8 Original price was: ₹1,850.00.Current price is: ₹1,210.00.
-24%
Click to enlarge

OpenPilot CC3D EVO Flight Controller Straight Pin

  1. 3axis Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
  2. Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,  DSMJ, DSMX satellites, and Futaba S.Bus receivers.
  3. Simultaneous support for multiple receivers.
  4. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
  5. MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
  6. FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under  development)
  7. 10 PWM outputs to servos or ESC’s, or for camera stabilization
  8. Camera stabilization supports up to 3axis  camera mounts with stabilization and manual control from any of configured receivers.
  9. Onboard USB connectivity for easy configuration.
  10. USB and serial telemetry and configuration
  11. Supported by powerful OpenPilot GCS
  12. 4 Mbit onboard memory
  13. 3C Quaternion based complementary filter running at 500Hz

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%

IBOTS1000

Original price was: ₹2,560.00.Current price is: ₹1,950.00.

Available on backorder

Available on backorder

Compare
Add to wishlist
  • Pick up from the IBOTS Store

Free

  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹75

  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹125

  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹250

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year

More details

  • Free Returns Policy

More details

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area

Description

With its smooth feature, the OpenPilot CC3D EVO Flight Controller Straight Pin card may be used directly with satellite receivers, eliminating the need for extra wires. S.BUS is also supported. A potent 32-bit STM32 CPU with 128 KB of Flash and 20 KB of RAM powers the Evo. Two applications of 3-axis MEMs technology are accelerometer and gyro.

Utilising the OpenPilot CC3D EVO Flight Controller Straight Pin card with your PC is simple. The card can be programmed in Windows, Mac, or Linux using USB and OpenPilot software; no drivers need to be installed. OpenPilot is a very easy-to-use programme that anyone may use, even without any prior programming knowledge. It’s possible that there are no technological differences between the OpenPilot CC3D EVO Flight Controller side Pin boards and the Straight Pin version of the flight controller. The only distinction between connecting pins is this.(One has a 90º side pin, whereas the other has a straight pin.)

Hardware features of the CC3D EVO

The ability to connect straight to a satellite receiver (no conversion cable needed).
robust STM32 32-bit microcontroller with 20KB RAM and 128KB Flash that operates at 90 MIPS.
Three-axis MEMS accelerometers and gyros with exceptional performance.
Compact 36 x 36 mm four-layer PCB for optimal flying performance and electrical noise reduction.
Linux, Mac, and Windows software support.
It is a pure plug-and-play device that supports high-speed USB directly without the need for drivers.
Spectrum support for satellite receivers.
Support for Futaba S-BUS hardware.
Superior port versatility with cutting-edge Flexi-port technology.
Onboard EEPROM with 4 Mbits for storing configurations.

Flexiport:

Another cutting-edge product from Copter Control is the Flexiport, which may be used to add a second serial port or I2C connectivity. Copter Control can use Flexiport to employ a single serial port or dual serial ports in addition to I2C, depending on your communication requirements.

Excellent user experience: 
OpenPilot has made every effort to make using the CC3D as simple and trouble-free as possible for you. A high-end device would naturally include complete hardware—no soldering required. An RC harness is supplied, so you can connect any standard PWM receiver. Every CopterControl board undergoes testing prior to shipment and is pre-flashed with the bootloader.
The most recent firmware may be loaded and everything customised for your specific aircraft using a regular tiny USB cable, which is not included. Despite its youth, the OpenPilot initiative aims to greatly improve the usability of Open Source software.
The OpenPilot programme is intended for universal use! Install packages are available for all major operating systems.

The programme is entirely free software available under the GPLv3 licence, and hacking is not only allowed but really encouraged.

Customer Reviews

0 reviews
0
0
0
0
0

Reviews

Clear filters

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.