Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone

The ReadytoSky 80A 2-6S ESC is designed especially for multirotor and quadcopter applications. which, in comparison to other ESCs on the market, offers faster and better motor speed control, improving flying performance.

Fast throttle response and multi-integrated special programme that outperforms all open-source software are features of the ReadytoSky 80A 2-6 ESC. This ESC is compatible with 2-6s Lipo Batteries and its firmware was specifically optimised to work with the disc motor through integrated circuitry. Its compatibility is quite good.

The MOSFET’s ultra-low resistance allows for a high flow capacity. Performance and stability of the MOSFET special driver integrated circuit greatly outperform those of the driving circuit with built-in discrete components.

You don’t need to worry about choosing the wrong ESC if you’re planning to build a drone; we’ve got you covered. We have everything you need at Ibots to get your drone idea off the ground.

Qualities:
1. Security power function: To prevent personal injury, the motor will not start right away when the power is turned on, regardless of where the throttle stick is positioned.
2. Adjusting the throttle between strokes and enhancing the linearity of the throttle response are the goals of the throttle range calibrated function.
3. Project that has been programmed (with throttle stick or card LED parameter settings available):
Brake settings: engaged or not engaged
Type of Battery: NiMH or Lithium battery
Protection Against Low Voltage Mode: Hard off/soft shutdown
Low Power Defence Low, medium, and high thresholds; Normal, soft, and super-soft start modes;
Time: light, medium, and bright
Return to the factory settings

4. Entire protection features:
1.Under-voltage protection: the user-specified programme causes the ESC to automatically       lower the output power when the battery voltage falls below the protective threshold.
2. Overvoltage Protection: an abrupt “beep” warning is also delivered when the input voltage exceeds the input range, preventing the engine from starting.

3. Overheat protection: when the temperature of the ESC rises too high, an integrated temperature detection circuit immediately lowers the output power.
4.Protection against loss of remote control signal: the signal is lost for one second to cut power, and then it has two seconds to shut off without producing an output of the remote control signal.