RTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX

Maximum Voltage Accepted: 16V.
Maximum Amperage: 2 A, L-C DC supply noise is reduced via a filter circuit.
Integrated in Reverse Polarity protection.
Small-scale layout
Using big value inductor and capacitor components, the filter is an LC type.
The soiled power supply can be cleaned with this filter.

Note:

Within India, 3 – 4 days lead time with 100% advance

For imports, 15 days lead time with 50% advance

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%

IBOTS1000

265.00

Available on backorder

Available on backorder

  • Pick up from the IBOTS Store

Free

  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹75

  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹125

  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹250

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year
  • Free Returns Policy

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area

Description

The LC-FILTER 2A 2-4S Lipo for FPV RTF LC / L-C Power Filter will clear out any filthy power supply. This small, powerful LC filter was created to filter out noise from a DC power supply. ideal for delicate RC and FPV components running on a single battery.

The filter’s characteristics help to lessen the effects of noise carried by the power wires and interference emitted through the air. This filter has the benefit of filtering both the positive and negative leads (common mode).

Ideal for configurations with a maximum 2A load and up to 16V. Sensitive FPV video systems are prone to issues when long power leads (7 cm+) are utilised, there is not enough room for wiring, transmitters are not adequately filtered, noise from speed controllers or switch mode DC-DC voltage converters is present, or—most frequently—a shared battery is used to reduce weight.

Video lines, banding, unexpected drop-outs, and a shorter transmission range can all be caused by interference. The majority of the noise and interference from high-frequency power supplies can be reduced with the aid of a low-pass LC filter.

This small, light power supply filter aids in clearing out the unclean DC current that frequently results in lines in wireless video footage. Using big value inductor and capacitor components, the filter is an LC type.

The filter helps clean up noisy power from a shared battery and lessens the ripple in DC-DC switcher supplies. This LC filter can assist in lowering video “noise” that may arise when the motor is operating, for instance, if the video camera and A/V transmitter are powered by the same 12V motor battery as your robot or R/C model.

Characteristics
L-C Filter circuit lowers noise from the DC supply.
Integrated in Reverse Polarity protection.
Using big value inductor and capacitor components, the filter is an LC type.
The collocation FPV map is appropriate for the LC filter, which successfully lowers the noise brought on the DC power.
The soiled power supply can be cleaned with this filter.
Numerous benefits include ideal sensitivity in FPV, RC components, and a small and efficient LC filter.
Compatible with: Helicopter, Aeroplane, Multicopter, Quadcopter, Remote-controlled aircraft.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.