Mid drive BLDC Motor 60v 1800W For E rickshaw

Using a mid-drive BLDC motor rated at 60V and 1800W for an e-rickshaw can offer even more power, potentially improving acceleration and performance, especially when dealing with heavier loads or hilly terrain. Here’s how you can utilize such a motor effectively:

1. Motor Selection: Confirm that the motor specifications align with the requirements of your e-rickshaw. A 1800W motor should provide sufficient torque and speed for most e-rickshaw applications.
2. Controller: Choose a suitable motor controller that can handle the higher power output of the 1800W motor. Look for features such as smooth acceleration, regenerative braking, and thermal protection to ensure efficient and safe operation.
3. Battery: Ensure your battery pack can supply the necessary voltage (60V) and current to power the motor effectively. Consider the capacity of the battery to ensure adequate range and performance between charges.
4. Drive System: Design or select a robust drive system capable of transferring power from the motor to the wheels efficiently. Consider factors such as gearing ratios, chain or belt quality, and alignment to maximize performance and minimize maintenance.
5. Mounting and Integration: Securely mount the motor within the e-rickshaw frame, ensuring proper alignment with the drivetrain components. Integrate the motor with other systems such as pedals and brakes, considering weight distribution and balance for optimal handling.
6. Safety Considerations: Prioritize safety by implementing features such as insulation for electrical connections, a reliable braking system, and emergency shut-off mechanisms. Ensure compliance with relevant safety standards and regulations for electric vehicles.
7. Testing and Optimization: Conduct thorough testing of the motor and drive system to verify performance and reliability. Fine-tune parameters such as controller settings and gear ratios to optimize efficiency and responsiveness.

Mid-drive BLDC Motor 60v 1800watt For E rickshaw This Full Kit includes a 60V  1800W BLDC Geared motor and a compatible E-bike controller designed to run motors up to 1800 Watts.

Mid-drive Motor 60v 1800W For E rickshaw High-Quality BLDC Motor Electric Scooter Bike Tricycle Gear Motor Electric Rickshaw Brushless Motor E-tricycle Motor This item is a brushless motor for an electric tricycle & E rickshaw.

Specification:

• Type: BLDC Motor
• Construction: Permanent Magnet
• Commutation:Brushless DC motor
• Voltage(V): 60V
• continuous torque: 750Kg-cm
• peak torque: 1250 Kg-cm
• Continuous  Speed(RPM): 2990RPM
• peak Speed(RPM): 2370RPM
• Continuous  Output Power:1840W
• peak Output Power:3497W
• Grade of protection: IP33
• Usage:E Rickshaw / Electric Tricycle / Activa (like scooter)
• Continuous current (A): 30.2A
• peak current (A) : 80.8A

What is a mid-drive motor?

Mid-drive motors are directly attached to the drivetrain and your pedaling inputs. In most cases, the drivetrain of a chain-drive electric bike is comprised of a conventional chain, chainrings, and tape, which cooperate to drive the rear wheel and move you forward.

Mid-drive motors are known for higher performance and torque when compared to a similarly powered traditional hub motor. One key motivation behind why would that be the chain drive motor drives the crank, instead of the wheel itself, multiplying its power and allowing it to better take advantage of the bike’s existing gears.

The single biggest benefit that mid-motors have over hub motors is their gear ratio. They permit the rider to drive the back tire through something very similar chain and gear set as the pedals, which means that low stuff can be chosen for driving up steep hills or accelerating from a stop with massive torque. A mid-drive motor in low gear can climb steeper hills than a hub motor of similar power and can climb hills for longer than a hub motor, which could overheat on long steep hill climbs.

Compatible battery pack LI-ion 60V 42Ah (Note: this item is not included in this kit)