PLC Programmable Controller DC 24V Relay Module FX2N-20MR with Base Industrial Control Board

This module features a built-in watchdog timer circuit to ensure that it runs for an extended period of time, as well as programmable control that can do thousands of functions with steady and dependable performance!

Some of the common features are shown as follows:

• Turn on the power supply, relay 1 is closed for N seconds, and then disconnect relay 2 for N seconds.
• When the power supply is turned on, relay 1 is switched off after N seconds, and then relay 2 is closed for N seconds and then is turned off.
• The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
• Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
• When signal 1 has a signal, relay 1 is closed, relay 2 is disconnected; when signal 2 has a signal, relay 1 is turned off, and relay 2 is closed.
• Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
• When signal 1 is triggered, relay 1 is controlled, and when signal 2 is triggered, relay 2 is controlled.
• Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
• When signal 1 has a signal, the motor is controlled to rotate; when signal 2 has a signal, the motor is reversed.

Features:

• This programmable logic controller has a 32-bit industrial-grade MCU that is quicker and has robust anti-interference.
• Superior chip, consistent operation, internet downloading, online tracking, and auto-save feature upon power outage.
• The programme supports GX-Developer and GX-work2, and it is written in the ladder logic programming language.
• The port used to upload, download, test, and monitor programmes is known as the programming port.
• It is easy to learn, stable, and reusable. 9600 is the PLC communication baud rate.