-25%
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-01-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-02-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-03-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-04-150x150.webp)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-05-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-06-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2023/06/ibots-79774-07-150x150.jpg)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹3,999.00 ₹2,999.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
Hall Current 15 Click as its foundation uses the TMCS1101-Q1, a precise Hall-effect current sensor featuring a 600V isolation working voltage, <1.5% full-scale error across temperature, and device options providing both unidirectional and bidirectional current sensing from Texas Instruments.
The input current flows through an internal 1.8mΩ conductor that generates a magnetic field measured by an integrated Hall-effect sensor and amplified by a precision signal chain. The device has a bandwidth of 80kHz and can be used for AC and DC current measurements. It is optimized for high accuracy and temperature stability, with offset and sensitivity compensated across the operating temperature range.
This Click board™ possesses two ways to communicate with the MCU. The analog output signal of the TMCS1101-Q1 can be converted to a digital value using ADC101C021, a 10-bit resolution analog-to-digital converter from Texas Instruments using a 2-wire I2C compatible interface, or can be sent directly to an analog pin of the mikro BUS™ socket labeled as AN. Selection can be performed by onboard SMD switch labeled as OUT SEL, setting it to an appropriate position marked as AN or ADC. The ADC101C021 can transfer data supporting modes up to High-Speed, alongside its alert function, which provides an interrupt routed to the ALR pin of the mikro BUS™ socket activated when analog input violates a programmable upper or lower limit value.
Applications: Can be used for AC or DC current-sensing in industrial and commercial systems, motor and load control, power factor correction, overcurrent protection, and many more
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.