Raspberry Pi 3 Model A+

The All new Upgraded 2018s Raspberry Pi 3 Model A+ now comes with the Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A+.

With Extended 40-pin GPIO header and Full-size HDMI it is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the model B+ but does away with the Ethernet jack and three of the USB Ports. This makes it lower power, less expensive and much lighter & smaller!

It’s still compatible with all Pi operating systems and software and has the exact same 40 pin GPIO connector and camera/display sockets, so any HATs or Pi Plates or other things that plug into the model B+ will work just the same.

It also has the same HDMI, sound/composite connector and micro-USB connector for power

Unlike the Raspberry Model B+, there’s only one USB port and no ethernet jack but it’s also significantly smaller at 65mm x 56mm if you don’t include overhang from the connectors.

Don’t forget, you’ll need a USB power supply with micro USB cable, and a microSD card with a Raspberry Pi OS on it (we suggest a Raspbian 4G card or NooBS 8G card)

To Get Started You’ll Need:

1. A micro SD card with NOOBS (see Software & OS tab)
2. A high-quality 2.5A micro USB power supply, such as the official Rapberry Pi Universal Power Supply

Specifications :-

Dimensions: 65mm x 56mm / 2.5″ x 2.25″
Processor: Broadcom BCM2837B0, Cortex-A53
Connectivity: 2.4GHz and 5 GHz IEE 802.11b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access: Extended 40-pin GPIO header
USB: One USB 2.0 Port – Keeping it compact means minifying the footprint as much as possible
No Ethernet Port

Video + Sound:

• 1 x full-size HDMI
• MIPI DSI display port
• MIPI CSI display port
• 4 pole stereo output and composite video port

Multimedia:

• H.264, MPEG-4 decode (1080p30)
• H.264 encode (1080p30)
• OpenGL ES 1.1, 2.0 graphics

Memory: 512MB LPDDR2 SDRAM

SD card support: Micro SD format for loading OS and data storage

Input power:

• 5V/2.5 A DC via micro USB
• 5V DC via GPIO header

* product image for illustration purposes only. actual product may vary.