ARF Quadcopter Economy Combo Kit

This is ARF Quadcopter Economy Combo Kit which will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles and began soldering. This Economy kit has very good products and is available at affordable cost.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

We’ve heard from a lot of peoples who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose providing an ARF Quadcopter Economy Combo Kit needed to build a quadcopter.

Specification and Features :

1. Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
   1. Materials: glass fiber + polyamide nylon
   2. Frame Weight: 280g.
   3. Height: 55mm
   4. Colored arms for orientation to keep you flying in the right direction.
   5. Power distribution board included in this item(inbuilt PCB).
   6. Pre-threaded brass sleeves for all frame bolts.
   7. Large mounting tabs on main frame bottom plate for easy camera mounting.
2. A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR
   1. KV: 1000
   2. MAX Efficiency: 80%
   3. MAX Efficiency Current: 4-10A (>75%)
   4. Current Capacity: 12A / 60s
   5. No Load Current: 10 V : 0.5 A

3. Orange HD Propellers 1045(10X4.5) ABS DJI Black (1CW+1CCW)

   1. Weight (1 pair) : 22 gm.
   2. Shaft diameter(mm): 7-(Flat Side) and 8-(Round Side)
   3. Total length : 10 inch (254 mm)
   4. ABS Material
   5. Very strong and lightweight.

4. SimonK 30A BLDC ESC Electronic Speed Controller

   1. Current: 30-40 A
   2. Constant Current: 30 A Maximum (40A for maximum 10sec)
   3. BEC: 3 A
   4. Good Speed Control
   5. Excellent Stability Control
5. APM 2.8 Multicopter Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft
   1. Needle: straight.
   2. Power supply: LP2985-3.3.
   3. Max voltage: 16V.
   4. Add a 47uF tantalum capacitor.
   5. Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
   6. Arduino Compatible!
   7. Includes 3-axis gyro, accelerometer, along with a high-performance barometer
   8. Onboard 4 MegaByte Dataflash chip for automatic data logging.
   9. Optional off-board GPS, a uBlox LEA-6H module with Compass.

6. CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-R6B Receiver Mode 2

   STICK MODE: Left hand or Right hand

   1. MODULATION: Frequency Modulation
   2. ANTENNA LENGTH: 115cm/26mm
   3. CODE TYPE: PPM/GFSK
   4. POWER: 12V DC
   5. RF POWER: Less than 0.8W
   6. CHANNELS: 6 channels
   7. High receiving sensitivity.
   8. 8 model memory, digital control.
7. Orange 3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
   1. Model No : Orange 3000mAh 30C 3S1P
   2. Capacity : 3000mAh
   3. Max Continuous Discharge : 30C(90.0A)
   4. Balance Plug : JST-XH
   5. Max Burst Discharge : 60C(180.0A)
   6. Discharge Plug : XT-60
   7. Charge Rate : 1-3C Recommended, 5C Max
8. Lipo Voltage Checker 2-8S
   1. Input: 2-8S
   2. Battery type: Lipo/LiFe/Li-ion
   3. Cell Voltage Display Range: 0.5v-4.5v
   4. Total Voltage Display Range: 3.7-36v
   5. Alarm set values: Off or 2.7-3.8v
9. XT60 Male w/ 12AWG Silicon Wire 10cm (1pcs/bag)
   1. Connector Type: XT60 Male
   2. Material of Connector: High-Temp nylon
   3. Length: 10 cm.
   4. High-Quality Connector
   5. Designed for heavy duty
   6. High Power Application
10. 10CM Male to Male Servo Lead (JR) 26AWG
    1. Connector: JR-Style
    2. Length: 10 cm
    3. Weight: 5 gm
    4. High-Quality cable
    5. One male and one female connector

Package Includes:

1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
4 x A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR
4 x Orange HD Propellers 1045(10X4.5) ABS DJI Black 1CW+1CCW- 4pairs
4x SimonK 30A BLDC ESC Electronic Speed Controller
1 x APM 2.8 Multicopter Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft
1 x CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-R6B Receiver Mode 2
1x Orange 3300mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
1 x Lipo Voltage Checker 2-8S
1 x XT60 Male w/ 12AWG Silicon Wire 10cm (1pcs)
4 x 10CM Male to Male Servo Lead (JR) 26AWG (1pc)