-24%
![](https://ibots.in/wp-content/uploads/2024/01/q-21-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/q1-19-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/01/q2-5-150x150.jpg)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹3,100.00 ₹2,350.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
The JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Black Box 2-6S LIPO F411 Flight Controller acro was created with a next-generation CPU to provide unmatched I/O capabilities in a small and incredibly lightweight form-factor, in addition to offering fantastic flight performance based on tried and true sensors.
A flight controller, or FC, is a tiny circuit board with several levels of intricacy. Its job is to control each motor’s RPM in response to input. The flight controller receives a directive from the pilot for the multirotor to move ahead, and it decides how to adjust the motors accordingly.
A flight controller has control over every aspect of the drone. It modifies the motors’ RPM to move the drone. It is a control system that uses the data from the sensors to determine how to fly the drone. This tiny computer board is equipped with a number of sensors that allow it to comprehend how the ship moves. It is equipped with magnetometer, barometer, accelerometer, and gyroscope sensors. The transmitter sends out a signal that regulates the motors and craft.
All things considered, the board is quite sturdy and performs admirably with the HAKRC 20 A ESC; the only caveat is that proper motor connections need switching between motors 1 and 2. The barometer isn’t very accurate. When I turn on the ALT hold mode, it starts to bounce a lot even if I packed a sponge above it. The best and most reliable features are the OSD and VCC feed, which provide you with a real battery voltage readout via Betalight. Everything else is excellent, a lightweight and strong board for a mini build.
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.