-35%
![](https://ibots.in/wp-content/uploads/2024/02/j1-1-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/j2-1-150x100.jpg)
![](https://ibots.in/wp-content/uploads/2024/02/j3-1-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2024/02/j4-150x150.jpeg)
![](https://ibots.in/wp-content/uploads/2024/02/j5-150x150.jpg)
![](https://ibots.in/wp-content/uploads/2024/02/j6-150x150.jpg)
4–6 V is the operating voltage.
Drain Current: 1 to 35 mA.
4.5 grams in weight.
When you lose contact with your remote control aircraft, let you know where it is.
Very helpful when the multirotor loses control.
Installing the alarm is simple; just link it between the servo and the receiver.
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹345.00 ₹223.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
A straightforward gadget, the Alarm Finder Tracer Buzzer for RC Lost Aircraft plugs into any servo/Rx port and, upon sensing the loss of the TX signal, loudly sounds an 85dB alarm.
Perfect for alerting you in the event that you forget to switch off your RX power source while in the pits, or in the event that you are having problems locating a model in the long grass. Just switch off your TX, and the alarm will go off in a few minutes. This is a less expensive fix for a highly prevalent issue.
How It Operates: The RC lost Helicopter plane finder Parkflyer glider with tracer Aircraft Simply connect the alarm between the servo and the receiver to use it as a servo extension cord. This makes using the alarm very simple. As soon as you power on your TX, two beeps will occur.
Turn off the TX or do not move any of the control sticks on it. After five minutes, a constant beep will be heard. As soon as you shift the control stick or switch on your TX, it will stop. The beep sound will change to a louder V sound if you ignore it for about two minutes.
In order to turn off the alarm, you must unplug it from the receiver. Before turning on the text, make sure the Polarity is correct.
Features:
Simple to operate.
Notify you when you lose contact with your remote-control aircraft.
Especially helpful when the multirotor loses control
Installing the alarm is simple; just link it between the receiver and the servo.
Ideal for locating misplaced unmanned aerial vehicles.
Compact and practical module.
When the TX signal is lost, it becomes extremely loud as long as it is disconnected from the receiver.
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.