-21%
![](https://ibots.in/wp-content/uploads/2024/02/p1-18-150x153.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p2-10-150x119.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p3-7-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p4-5-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p5-1-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p6-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p7-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/p8-150x150.webp)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹310.00 ₹245.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
The Maxim MAX6675 K-Thermocouple to Digital Converter IC is used by this MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature sensor to provide a digital serial interface (SPI compatible) compatible with microcontrollers for an accurate temperature compensated measurement of the supplied K-Type thermocouple sensor.
It provides temperature readings with a resolution of 0.25°C and a 12-bit range from 0°C to 1024°C (the maximum temperature of the supplied sensor is 450°C).
The thermocouples’ spade connectors can be connected to screw terminals, and an Arduino development board or other microcontroller can be accessed by a standard 5-pin 0.1′′ header.
The thermocouple sensor that is provided has a 4.5 mm diameter and a 6 mm threaded mounting bolt. The sensor is around 50 cm long overall, including the cable and spade connectors.
Features:
Pretty simple stuff. Keep the note about the thermocouple polarity in mind as you make these connections.
// Sample Arduino MAX6675 Arduino Sketch #include "max6675.h" int ktcSO = 8; int ktcCS = 9; int ktcCLK = 10; MAX6675 ktc(ktcCLK, ktcCS, ktcSO); void setup() { Serial.begin(9600); // give the MAX a little time to settle delay(500); } void loop() { // basic readout test Serial.print("Deg C = "); Serial.print(ktc.readCelsius()); Serial.print("t Deg F = "); Serial.println(ktc.readFahrenheit()); delay(500); }
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.