-15%
![](https://ibots.in/wp-content/uploads/2024/02/x1-13-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/x2-11-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/02/x3-6-150x150.webp)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹4,950.00 ₹4,210.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
An 8×8 array of infrared thermal sensors makes up the AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module. It will provide an array of 64 distinct infrared temperature measurements over I2C when linked to your microcontroller (or Raspberry Pi). It resembles the high-end thermal cameras, but it’s smaller and easier to integrate.
Thermal Imager Array Temperature Sensor Module AMG8833 IR 8*8
With an accuracy of +/- 2.5°C (4.5°F), the AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module can measure temperatures between 0°C and 80°C (32°F and 176°F). Up to 7 metres (23 feet) are the maximum distance at which it can detect a human. Its 10Hz maximum frame rate makes it ideal for building your own tiny thermal camera or human detector. We have code to use this breakout with a Raspberry Pi running Python or an Arduino or comparable device (the sensor communicates via I2C). Using the SciPy Python package for image processing, we were able to interpolate the 8×8 grid on the Pi and obtain some quite good results.
The AMG8833 is an advancement in 8×8 thermal infrared sensors, with enhanced functionality over its AMG8831 predecessor. The sensor contains a customisable interrupt pin that can trigger when any particular pixel crosses or falls below pre-set criteria, although it only supports I2C.
We selected and mounted it on a breakout board with a 3.3V regulator and level shifting to make it simple to operate. Therefore, any 3V or 5V microcontroller or computer can use it.
Power Pins:
Logic pins:
Features:
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.