200W DC-DC Boost Converter 6-35V to 6-55V Step-Up Adjustable Power Supply

The massive toroidal inductor and large heatsink indicate that the 200W DC-DC Boost Converter 6-35V to 6-55V Step-Up Adjustable Power Supply is well into the heavy-duty end of the spectrum. With an output power of up to 200W, this adaptable 200W DC-DC Boost Converter/power supply module increases any input voltage between 6V and 35V to any output voltage between 6V and 55V.

Step-up DC-DC Boost Converter, 200W, 6-35V to 6-55V With the ability to raise conventional 12V battery power to 19V for use as a laptop computer power supply or to 18V or 24V for other applications requiring higher voltages, the Adjustable Power Supply is particularly helpful for automobile 12V applications.

Note that there is no protection against reverse polarity. It is advised to use a series diode. This might not be an option at high loads, therefore be careful with the input polarity to avoid burning the module!

Applications:

1. DIY adjustable output vehicle power supply. Provide 12V input, the output voltage can be continuously adjusted from 14V to 35V (output voltage cannot be lower than the input voltage).
2. Universal car laptop power supply. Provide 12V input, the output voltage is adjustable to your notebook to work. Can easily drive dual-core or quad-core notebooks at 19V and up to 6A output current.
3. Boost Charger, to convert your car’s 12V power to greater than 12V, such as 18V or 24V
4. Power supply for your electronic devices, as long as the voltage is adjusted to the voltage and does not exceed the module’s rated current.

Note:

1. Set the output voltage to the desired level using a voltmeter before connecting it to your equipment or load.
2. Short circuit protection: None, please use caution to protect the module from overcurrent
3. Input reverse polarity protection: None, please use a diode in series with the input to protect against input reverse polarity

Features :

1. The non-isolated step-up power conversion module
2. Onboard LED illuminates when the voltage is applied to the module
3. Equips Multi-turn Potentiometer.
4. The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)