-18%
![](https://ibots.in/wp-content/uploads/2024/05/q1-14-150x150.webp)
![](https://ibots.in/wp-content/uploads/2024/05/q2-2-150x150.png)
Hurry and get discounts on all Raspberry Products up to 20%
IBOTS1000
₹449.00 ₹368.00
Free
₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹75
₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹125
₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.
2-3 Days
₹250
Our courier will deliver to the specified address
2-3 Days
Rs. 99
Payment Methods:
1. Order the Product and Specify the Delivery Method
2. You Will Receive an Order Confirmation Message
3. Wait for Your Order to Arrive
4. Pick up Your Order at The Checkout Area
Filament is printed in the 3D printer using the RepRap MakerBot’s assembled aluminium extruder J-head hotend. Expand on the renowned high-temperature capabilities that let you print materials at high temperatures. The goal of the product right now is to enhance functionality by using a flexible and soft filament.
With flexible filaments like Ninja Flex, Flex PLA, and Flex Polyester, you may add the confinement and constraint required to produce high-quality prints by extending a PTFE liner tube through the hot end into your 3D printer extruder.
This gives your printer access to a plethora of new possibilities. Working with polycarbonate up to 300 degrees Celsius is made possible by all metal, as are upcoming materials that demand temperatures greater than those that can be reached with plastic extruders and hot ends.
The filament drive mechanism of a 3D printer can be forced into a tube if it is mounted on a stationary component. Because Teflon (PTFE) is a slippery material, it is beneficial. Its friction with the plastic is minimal. This prevents fatigue and energy loss. The hot end of the extruder is attached to the other end of the tube. Ed Sells proposed and pioneered the idea of employing a Bowden cable as a guide.
1. All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end.
2. Tested with PLA, ABS, polycarbonate, nylon, and PVA.
3. The J-head is assembled with 100K NTC thermistor and Cartridge heater, NOT heat resistor
Only logged in customers who have purchased this product may leave a review.
Categories
Useful Links
Useful Links
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.