Motors
Showing 1–12 of 36 results
1 channel 5V 10A Relay Control Board Module with Optocoupler
Original price was: ₹85.00.₹56.00Current price is: ₹56.00.- One channel
- 5V is the relay voltage.
- Pin of a high impedance controller
- Pull-down circuit to prevent malfunctioning
- One contact that is typically closed and one that is generally open
- Relay coil increase and triode drive
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger, （with Guide Rail）
Original price was: ₹440.00.₹375.00Current price is: ₹375.00.- One channel
- Voltage of the GUIDE RAIL Relay is 12V.
- Pin of a high impedance controller
- Pull-down circuit to prevent malfunctioning
- One contact that is typically closed and one that is generally open
- Relay coil increase and triode drive
1 Road/Channel Relay Module (With Light Coupling) 24V
Original price was: ₹105.00.₹82.00Current price is: ₹82.00.- 24 V DC operating voltage
- equipped with a 10A@250VAC / 10A@30VDC high-current relay
- It is capable of managing both AC and DC appliances, including fans, lights, motors, solenoids, and more.
- Superior screw terminals (Terminal Block) in the colours C, NC, and NO are available for a simple and fast connection.
- Your microcontroller is protected by a freewheeling diode.
- Signal of Input Burg stick pin linked for convenient access
- LED status indicators to show the ON/OFF condition of the relay
- mounting holes offered
12V 1 Channel Relay Module
Original price was: ₹121.00.₹89.00Current price is: ₹89.00.- superior quality and brand new.
- One channel relay interface board with a high-current relay that can handle 15 amps at 125 volts or 10 amps at 250 volts
- Standard interface that microcontrollers (Arduino, 8051, AVR, PIC, DSP, and ARM) can directly control
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
Original price was: ₹690.00.₹605.00Current price is: ₹605.00.- 12V relay with optocoupler protection and a 10A 250V AC contact capacity.
- An external power source is not required for the onboard power supply module. The I/O port driver is in low activity.
- The module can be utilised as an expanded output PLC module, appliance control, and microcontroller development board module.
- It uses the best isolation optocouplers available, with excellent jamming resistance and steady performance.
- Any full on/off road or any other road might be the 1-16 road.
- It is quite convenient to be able to connect all interfaces directly using the terminal leads.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
12V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
Original price was: ₹499.00.₹415.00Current price is: ₹415.00.- Capacity of Output: DC 5V-30V, AC 220V 10A
- Current Static: 20 mA
- 50mA working current
- Working Voltage: 12V (variations between 10V and 16V won’t have an impact)
- Trigger Signal: 4V to 20V high-level voltage
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger
Original price was: ₹610.00.₹525.00Current price is: ₹525.00.- DC 5V supply voltage
- Current in Quiescence: 5mA
- 190mA is the maximum operating current.
- Mode of Trigger: Both high-level and low-level
- Voltage of load: DC 30V / AC 250
- 30A is the load current.
- Relay Life: over a 100,000 times
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
24V 4-Channel Relay Module (with Light Coupling)
Original price was: ₹290.00.₹208.00Current price is: ₹208.00.- 24 V DC operating voltage
- Two distinct LEDs to indicate the relay’s on and off states
- Activating the input voltage 3.3-5 volts 4) EMF protection for the back
- equipped with a 10A@250VAC / 10A@30VDC high-current relay
- It is capable of managing both AC and DC appliances, including fans, lights, motors, solenoids, and more.
- Superior screw terminals (Terminal Block) in the colours C, NC, and NO are available for a simple and fast connection.
- Your microcontroller is protected by a freewheeling diode.
- Signal of Input Burg stick pin linked for convenient access
- mounting holes offered
24V 8 Channel Relay Module
Original price was: ₹550.00.₹445.00Current price is: ₹445.00.- Power and trigger voltage are connected via the header connector.
- Each channel has an LED that shows the relay status.
- For simple relay output and aux power connection, use a screw terminal connector.
4 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
Original price was: ₹620.00.₹552.00Current price is: ₹552.00.- Number of Part: G3MB-202P
- Energy source: 12 VDC/160 mA
- Voltage at Trigger (VDC): 6–12
- VAC switching voltage: 240@2A
- Phototriac isolation
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
4 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
Original price was: ₹209.00.₹151.00Current price is: ₹151.00.- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting
433MHz 12V 2 Channel, Relay Module Wireless, Remote Control Switch, without Battery
Original price was: ₹850.00.₹735.00Current price is: ₹735.00.- Simple installation and wireless control.
- Control electrically powered lights, fans, and motors
- 12 V is the operating voltage.
- Working Current Maximum: 10 mA
