Showing 1–12 of 43 results
USB interface module
3.3V Adapter Board for 24L01 Wireless Module
- With the NRF24L01 wireless module, it is compatible.
- Include the onboard core nRF24L01+ Breakout Adapter. 3.3 volts for the regulator
- Upon board Your Arduino +5V supply is accepted by the 3.3V voltage regulator, which then supplies 3.3V to the connected nRF24L01+ module.
- makes connecting to nRF24L01+ modules simple.
- Low power on SMD LED display
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board
- Voltage output support: 0-3.3V, 0-5V, 0-10V; Current Input: 4-20Ma & 0-20mA
- Weight: 12 g; different voltage ranges are available at the output; wide supply voltage range
- Adjustable zero and range
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
CH340G USB to RS232 TTL Auto Converter Adapter Module for Arduino14 f
- 500mA resettable fuse
- Real switchable 3.3V / 5V
- With the transformer is 3.3V.
- Reception of Green Data referencing an indicator
- Products with many functions for CTS access
- Two-circuit protection
- Fully operational pins 5P
- A blue power indication
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
- Connects a DB9 connector’s nine pins to screw terminal blocks.
- The communication debug adapter’s nine-piece signal line was all lead out with the number and name prominently displayed;
- Improved contact, anti-oxidation, all-copper DR9 seat;
- Military board, corrosion-resistant, three anti-paint sprays across the board;
- 96 mm terminal spacing, 2 mm screw hole diameter, and assembly requires a 2 mm screwdriver width;
- Adoption of IS0-9001-compliant ecologically friendly copper terminals.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner
- Load Value Calculated by Engine RPM
- Temperature of the Coolant
- Status of Fuel System and Vehicle Speed
- Pressure on the intake manifold Short-Term Fuel Trim Long-Term Fuel Trim
- Accurate Time of Intake Air Temperature
- Absolute Throttle Position, Air Flow Rate, Oxygen Sensor Voltages, and Related Short-Term Fuel Trims
- Fuel Pressure and Fuel System Status
EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer
- With a fast 8051 core, 16K RAM, and compatibility with USB 1.1 and USB 2.0, the High-Speed USB2.0 specification operates at 480Mbps.
- For IDE devices, an integrated IDE interface
- USB Port-Powered Compact Design
Hiletgo FT23RL FTDL Mini USB to TTL Serial Converter
- FT232RL Adapter Module Chip: 5V or 3.3V interface level is selectable for the FT232RL USB supplied power.
- PCB dimensions: 17 x 32.5 mm
- Elicit every FT232RL chip signal port at the TTL/CMOS level.
IIC/I2C Serial Interface Adapter Module (Made In India)
- 5 volts for power supply.
- PCF8574 is used to control an LCD display serially using I2C.
- Through a jumper on the board, backlighting can be turned on or off.
- using a potentiometer to control contrast.
- Eight modules can be connected to a single I2C bus (address changes are possible with solder jumpers).
M.2 M KEY To A KEY Adapter, for PCIe Devices, Supports USB Conversion
- Compatible with two or more specifications: M.2(A KEY) 2230/2242 and M.2(M KEY) 2260/228
- LED indicators: by default, LED2 stays off, but when the device is driven successfully, LED1 will light up.
- Summary Measurements: 80 x 22.5
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
- The most recent wireless scan tool development.
- The majority of OBD-II protocols are supported.
- Connect via Bluetooth; requires no wires, batteries, or switches.
- Bluetooth-enabled wireless 5–10 metres
- Clear the Check Engine lights and retrieve the Fault Codes (DTCs).
- Turn off the MIL (“Check Engine”) light and clear the issue codes.
- Determine how many answers you want to receive at most.
PCF8575 Remote 16 Bits I2C IIC SMBus I/O Expander Module
- Kind of Item: PCF8575
- 2.5–5.5 VDC is the operating voltage.
- Maximum operating current: 100 mA
- I2C address: 0x20 by default; soldering A1 and selection pads A2 will modify it.
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Adopt the PL2303HX imported controller, which has a 500mA self-recovery fuse for protection and a high speed flash stabilisation capability.
- Real-time data transfer status monitoring is possible with two data transmission indicators.
- Hold back The pin interface of 3.3V and 5V makes it simple for the DDWRT of various voltage systems that require electricity.
- To prevent material shortcuts from burning down the board, a high-quality transparent heat-shrinkable sleeve covers the entire board, insulating it from the outside.
- Electrostatic packaging guarantees that the board won’t sustain damage prior to usage.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...







Motors