16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board

  • Its outside diameter is 68 mm.
  • DC 4–7 V is the supply voltage.
  • WS2812B is the LED driver chip.
  • a single wire for communication as the interface.
  • Use 800 Kbps to send data.
  • It was a very consistent colour of light.
  • Soft lights a lamp strip with a full-color module.

Note:

  • Within India, 3 – 4 days lead time with 100% advance
  • For imports, 15 days lead time with 50% advance

 

IBOTS's 10th Anniversary Sale

Hurry and get discounts on all Raspberry Products up to 20%

IBOTS1000

142.00

Available on backorder

Available on backorder

  • Pick up from the IBOTS Store

Free

  • Delivery Charges: Tamil Nadu

₹75 for parcels below 1 Kg and ₹100 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹75

  • Delivery Charges: Other South India

₹125 for parcels below 1 Kg and ₹175 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹125

  • Delivery Charges: North India

₹250 for parcels below 1 Kg and ₹325 for parcels weighing between 1 Kg to 2 Kg.

2-3 Days

₹250

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

Rs. 99

  • Warranty 1 year
  • Free Returns Policy

Payment Methods:

1. Order the Product and Specify the Delivery Method

2. You Will Receive an Order Confirmation Message

3. Wait for Your Order to Arrive

4. Pick up Your Order at The Checkout Area

Description

Let’s be clear right away about the round, black shape of the 16Bit WS2812B 5050 RGB LED Built-in Full Colour Driving Lights Circular Development Board! 16 incredibly bright NeoPixels LEDs are grouped in a circular PCB with an outside diameter of 68 mm.

The output pin cascade can be used to easily link these ring RGB lamps to each other’s input pin (DI-DO). Each LED lamp has an integrated driver chip, which makes our LED intelligent and addressable, allowing you to manage as many LED lights as possible with only one single chip.

Since each has a constant current drive of -18 mA, the LED colour will be fairly consistent even if the voltage changes. This eliminates the need for an extra resistor to limit current, making the RGB lamp ring’s overall design small and incredibly simple to operate. utilising a 5V power source to operate the RGB light ring.

Features:
Single wire communication to maximise the reduction of I/O port pressure; use of the RGB WS2812B driver chip, so that the peripheral circuit needs only one capacitor to meet its requirements and allow people to appreciate beauty; additionally, this RGB ring can be connected via a straightforward Dout input port, and another RGB lamp cascade using the same chip can be used without taking the shape of the limit into consideration.

Features :

  1. The control circuit and the LED share the only power source.
  2. Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point.
  3. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
  4. Built-in electric reset circuit and power lost reset circuit.
  5. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
  6. Cascading port transmission signal by a single line.
  7. Any two points the distance more than 5m transmission signal without any increase circuit.
  8. When the refresh rate is 30fps, cascade number is not less than 1024 points.
  9. Send data at speeds of 800Kbps.
  10. The color of the light was highly consistent
  11. Full-color module, Full-color soft lights a lamp strip.
  12. LED decorative lighting, Indoor/outdoor LED video irregular screen.

 

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.