3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality

The safety of the battery pack is guaranteed by the 3S 11.1V 10A 18650 Lithium Battery Overcharge and Over-current Protection Board of Good Quality. The architecture of this battery management system is appropriate for: 10.8V is the polymer battery’s rated voltage. 11.1V (rated voltage for 18650 or 3.7V lithium batteries) 12.6V, the full charge voltage of a lithium battery.

Note: Due to human measuring errors, please allow 1-3mm. Due to differences in monitor calibration, the colour of the item in images may appear slightly different on your computer screen.

Additionally, while utilising the 3S 11.1V 18650 Lithium battery protection board 12V 10A Overcharge and Overcurrent protection, make a note of and attend to the following.

• The battery discharge rate is greater than 3C and is greater than 3A current discharge product.
• Formula for calculating multipliers: A 1C battery with 2000 capacity can have a maximum operational current of 2AH * 1 = 2A.
• A 3C ratio battery with 2000 capacity can have a maximum working current of 6A (2AH * 3).
• Please make sure that all three batteries in series 3 have the same voltage; if not, replace each pair of batteries before using. The battery that experiences the fastest voltage drop during a discharge test is the one that differs from the other battery.
• There will be an output after the line is connected to the 12.6V charge voltage activation that is required.
• The battery discharge rate should be 3C or more when the current is 3A over the discharge products. Formula: The maximum operational current (2AH*1=2A) is equivalent to the battery’s 2000 capacity (1C ratio).The battery’s 2000 capacity and its 3C ratio correspond to a maximum working current of 2AH*3=6A.When using a battery, its power will become inapplicable; this condition should not be prolonged as the battery will eventually get damaged. interpretation of a description.
• 3 Series: (series combination of lithium polymer or 18650 3 batteries)
• 10.8V (rated voltage for polymer batteries)
• 11.1V (rated voltage for 18650 or 3.7V lithium batteries)
• The lithium battery voltage is 12.6V.If the battery heats up while being used, battery power is not useful. This is not a situation that can be sustained over time. If not, the battery will eventually get destroyed.

Features:

• Features: Three different types of protection boards for lithium batteries.

• Automatically remove protection when the conditions for protection are restored.
• Featuring the ability to protect against overcharging, overdischarge, short circuit, and overcurrent.
• Suitable with 11.1V, 12V, and 12.6V lithium battery packs.
• Quiescent current is less than 30 uA, indicating low power usage.