Emax BLHeli Series 12A ESC with Oneshot (Original)

Oneshot Emax BLHeli Series 12A ESC Further optimisation was done to achieve ideal drive performance based on BLHeli firmware. It is protected against low voltage, overheating, and loss of throttle signal.

A separate power supply for the MCU and BEC is included with the ESC, which improves its capacity to remove magnetic interference. This ESC’s parameter can be adjusted via a transmitter or programme card. It is possible to adjust the throttle range to work with various receivers. fitted with a switch- or linear-based built-in BEC. Maximum speed for a 2-pole is 210,000 rpm, a 6-pole is 70,000 rpm, and a 12-pole is 35,000 rpm.

Features:

Make use of genuine electronic components to guarantee excellent quality and increase the ESC’s current endurance capacity.
Optimised for high performance with excellent linearity and significantly faster throttle response, based on BLHeli firmware.
Specifically made for multirotors and suitable with both helicopters and fixed-wing aircraft.
The motor can rotate in one of three directions: normal, reverse, or bidirectional.
With a transmitter or a programming card, all parameters can be preset.
Numerous safety features, such as overheat and low voltage cut-off prevention.
Keep the throttle in the FULL OFF position for a bit, and the ESC will beep to help you locate the device.
The throttle response is smooth, linear, and accurate, and it can be adjusted to work with any receiver.
One-time Accessible.