Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit

All the control components required for a quadcopter are included in the PIXHAWK PX4 2.4.7 Flight Controller with SHOCK ABSORBER + UBLOX NEO-M8N GPS + Pixhawk Power Module + PPM Encoder Combo Kit, which is reasonably priced and of high quality.

High-performance autopilot-on-module PIXHAWK is appropriate for fixed wing, multirotor, helicopters, vehicles, boats, and any other mobile robotic platform. Targeting high-end research, amateur and industry needs, it combines PX4FMU + PX4IO features.

There are numerous beneficial uses for the universal vibration damping mount, also known as the shock absorber. This is an isolated flight controller attachment for a free camera. Sensitive electronics and cameras benefit greatly from the center supported plate’s ability to absorb vibration. Bolt or tape style attachment is possible with the flush flat-bottom installation.

The new Ublox GPS NEO-M8N model has low power consumption and high precision; it supports GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more. Its ultimate accuracy is 0.6 meters, or about 0.9 meters, more than that of the NEO-7N model, which had an accuracy of 1.4–1.6 meters.

The GPS Folding Antenna Base mount can be mounted to your craft using the cross slides or the base plate M3 hole. It also comes with a laser-cut adhesive pad for fast attachment of your GPS module. Using a 6-pos cable, the PIXHAWK PX4 2.4.6 Power Module offers your Pixhawk PX4 2.4.7 clean power from a LiPo battery, along with readings of battery voltage and current consumption.

With just one wire connecting flight control, the Pixhawk PPM Encoder Module can code several channels of PWM signal output from the receiver to the PPM composite signal output.

Specifications and Features:

Pixhawk V2.4.7 Flight board:

1. 168 MHz / 252 MIPS Cortex-M4F
2. 14 PWM / Servo outputs (8 with failsafe and manual override, 6 auxiliaries, high-power compatible)
3. Abundant connectivity options for additional peripherals (UART, I2C, CAN)
4. Integrated backup system for in-flight recovery and manual override with the dedicated processor and stand-alone power supply (fixed-wing use)
5. The backup system integrates mixing, providing consistent autopilot and manual override mixing modes (fixed wing use)
6. Redundant power supply inputs and automatic failover
7. External safety switch
8. Multicolor LED main visual indicator
9. High-power, multi-tone piezo audio indicator
10. MicroSD card for high-rate logging over extended periods of time

Processor:

1. 32bit STM32F427 Cortex M4 core with FPU
2. 168 MHz
3. 256 KB RAM
4. 2 MB Flash
5. The 32-bit STM32F103 failsafe co-processor

Sensors:

1. ST Micro L3GD20H 16 bit gyroscope
2. ST Micro 3CLDW 303H 14 bit accelerometer/magnetometer.
3. Invensense MPU 6000 3-axis accelerometer/gyroscope.
4. MEAS MS5611 barometer

Interfaces:

1. 5x UART (serial ports), one high-power capable, 2x with HW flow control
2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector)
3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input
4. Futaba S.BUS® compatible input and output
5. PPM sum signal input
6. RSSI (PWM or voltage) input
7. I2C
8. SPI
9. 3.3 and 6.6V ADC inputs
10. Internal micro USB port and external micro USB port extension

Power System and Protection:

1. Ideal diode controller with automatic failover
2. Servo rail high-power (max. 10V) and high-current (10A+) ready
3. All peripheral outputs over-current protected, all inputs ESD protected

1. Color: Black
2. Material: Glass fiber
3. Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and      Pixhawk 2.4