Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver

The way people experience remote control (RC) has been revolutionised by the Radiolink AT10 2.4GHz 12CH RC Drone Remote with PRM-01 Transmitter and R12DS Receiver. This radio transmitter and receiver can now compete in the highest levels of competition. For all fans of Radio Control models, RADIOLINK developed this 12-channel, 2.4GHz Module Transmitter (PRM-01), which is patented for use at home. With its extremely low power consumption, great receiver sensitivity, and exceptional active and passive anti-jamming characteristics, the system is specifically designed for all radio control models. using years of market research and extremely demanding testing by engineers.

The latest generation of radio systems uses 2.4GHz as the standard due to its many benefits. By operating at 2.4 GHz, you can completely eliminate interference and glitching that can occur with traditional frequency systems. This is because the radio control is no longer within the frequency range of any “noise” produced by the other electronic components on your helicopters, such as the brushless motor, Electronic speed controller, Servos, and any metal to metal noise.

Applications:

Enables you to fly almost any kind of aircraft, including fixed-wing, rotary, glider, multirotor, and hybrid models.
Outstanding Transmitter for 3D Flying, Sports, Competition, and Recreation

Safety Measures:

Never Perform The model when the weather is bad. Low visibility can make the model confused and lose control.
Prior to attaching the receiver, make sure the trim levers are at zero and the battery has been changed. You should also verify all the servos and their connections before every run. Finally, make sure the receiver is turned off before the transmitter.

Features:

Up to 15 aircraft’s model setup and user name can be kept.
Telemetry and RSSI
Adaptable contrast and brightness on the display
several alarms
Reversing the servo and adjusting the termination point
Servo travel limit that can be adjusted to avoid pushrod jamming
The Servo Cycle feature aids in identifying servo issues.
Exponential, triple, and dual rates
Trim switches with digital control
The servo neutral position is altered by the Sub-Trim programme.

Gimbal stick length and tension adjustments

 Specifications:

 AT10II RC Transmitter Specifications:

12CH channels
Control Range: Up to 4000 metres in the air; 2.4GHz ISM bands (2400MHz to 2483.5MHz) in terms of frequency
Bandwidth of the channel: 5.0 MHz
Dissemination Spectrum: DSSS&FHSS
Rejection of the next channel: 38 dBm
Power of Transmitter: <100mW (20dbm)
~90mA of operating current
7.4–15.0 volts for operating voltage
Section Accuracy: 4096
Display: 3.5 inches 16 vibrant colours and 320 by 480 pixels
R12DS, R9DS, R6DS, R6DSM, and R12DSM are the support receivers.

R12DS Specifications:

4.6–10 V for operating voltage
Current of Operation: 38–45 mA @ 5 V
Signal Output: PWM & SBUS
Channel: 12 CH
Range of Control: 4 km in the air
14 grammes in weight
Measurements: 50x32x15 mm