SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module

You’ve come to the right place if you’re looking for a product to help cool down your electronic equipment or DIY project. The Peltier Thermoelectric Effect is applied simply in the TSP1848-27145 4040 mm Thermoelectric Cooler 10A Peltier Module. With a surface area of 40 × 40 mm, the module’s 127 semiconductor couplings efficiently heat and cool up to 150°C.

These miraculous Peltier effect-based cells have the ability to produce electricity. The output voltage and current of the SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module vary depending on the temperature, with a maximum operating temperature of 150°C.

Thermoelectric Power Generators, commonly referred to as Peltier Modules or TEGs, generate a temperature differential that is detected on both sides. This temperature differential sensing can be utilised to produce electricity.

The device will begin to generate voltage based on the amount of heat applied after putting cold on one side and heat on the other. With mA of current, the SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module will produce a modest voltage.

A semiconductor-based electronic device that performs similar duties to a tiny generator is called a Thermoelectric Generator (TEG) module.

Temperature (°C)                      20       40       60      80      100
Open circuit voltage (V)         0.97      1.8      2.4     3.6      4.8
Current (mA)                            225      368      469     558      669

Operating Advice: 

• Don’t let the module’s maximum working temperature be exceeded.
• Expected life span: 200,000 hours.
• Based on extensive testing, the failure rate is 0.2%.

Connection Diagram of  SP1848-27145 with  Arduino

Note:

• One side of the model is exposed to “heat-sink or ice,” while the other side is exposed to “heat.”
• Apply two to three droplets of greasing compound to the TEG Module’s sides.

Features:

• Easy to use, compact and light in weight.
• Intended primarily for the production of power.
• Include thermal components designed for the best Seebeck power generation and are sealed for moisture protection.
• 150°C high temperature and NM static protection.
• Checked cooling cells for quality.
• Easy to set up and use.
• You can use a 5v Booster board to charge the smartphone.