Showing 109–120 of 2379 results
Shop
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
- 12 VDC is the operating voltage.
- Current rating: 800 mA
- <6 seconds were needed for inflation (from 0 to 300 mmHg in a 1000CC closed container).
- >400 mmHg (53.33 KPa) is the minimum pressure.
- Maximum pressure: 100KPa, or 750.062 mmHg.
- Airtight only for inflation, hermeticity: <5 mmHg (from 1000 mmHg in 1000CC container min).
- >15 L/min flow rate
- Noise: <55dB (measured at a 30-cm separation)
- Life: 100,000 cycles examined
16-bit or 32-bit PIC Start-Up Kit – SK1632
-
Input voltage range: 7V to 15VDC.
-
1 x Programmable push button (digital input, connected to A1)
-
1 x Programmable LED (active high, connected to A0)
-
Replaceable Crystal (default 8MHz)
-
Ready pads for 2×8 Character parallel interface LCD
-
USB micro B socket for PIC that supports USB peripheral
-
USB bootloader may be utilized if needed.
16×2 Character LCD Display 3.3V
This is 16×2 Character LCD Display with Yellow Green back-light and black character. This 16×2 Character LCD Display operates on power 3.3V. It is suited for applications in Student Project, Collage, copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices. Interface code is freely available. You will need 7 general I/O pins(If use in 4-bit Mode) to interface to this LCD screen.
16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like, 8×1, 8×2, 10×2, 16×1, etc. but the most used one is the 16×2 LCD. So, it will have (16×2=32) 32 characters in total and each character will be made of 5×8 Pixel Dots.
Note:Â *Using this LCD with in a 5V logic circuit may damage it.
1602 LCD Board Keypad Shield Blue Backlight
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
- Its outside diameter is 68 mm.
- DC 4–7 V is the supply voltage.
- WS2812B is the LED driver chip.
- a single wire for communication as the interface.
- Use 800 Kbps to send data.
- It was a very consistent colour of light.
- Soft lights a lamp strip with a full-color module.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
16mm metal push button waterproof LED light self-lock self-reset button 1NO1NC Orange Color
- Material made of stainless steel for prolonged use
- Orange coloured LED ring with built-in colour illumination on the button
- luminous daylight-colored LEDs
- Push to make and push to break functions with a single pole
- Front and back panel seals for TVS and IP67 security
- Hex nut and rubber ring for fixing, Dust- and water-resistant
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
16T freewheel & adapter
- Product: 16T freewheel & adapter
- Color: ‎Brown Golden
- Material: Steel
- Size: 1/2″x 1/8″ x 16T
16×2 (1602) Character Green Backlight LCD Display
- Model: JHD659 Y/YG
- Display: 16×2 character
- Outline: 80.0×36.0×14.5
- VA: 64.5×14.5
- Controller: SPLC780D
- Character: 2.95×4.35
- Driver: 1/16
17S / 60V / 40A LITHIUM-ION BMS WATERPROOF WITH THERMAL SENSOR
“EV 17S / 60V / 40A Lithium-Ion BMS Waterproof with Thermal Sensor: A robust Battery Management System designed for electric vehicles with a 17-series lithium-ion battery configuration. With waterproof housing and integrated thermal sensor, it ensures reliable performance and safety in diverse environmental conditions.”
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
- Voltage input: 8 to 60V
- Maximum current for 10V–30V input voltage is 35A–40A; maximum current for 31-60V input voltage is 30A–35A.
- Quiescent current: 15 mA; greater output voltages will result in a higher quiescent current when measured between 12 and 20 volts.
- Output voltage: constantly adjustable between 12 and 97V
- Maximum Output Current: 35 A
180W AC-DC 110-220V to, 36V 5A Switching Power, Board
- AC input: AC110-220V (Global common)
- AC frequency: 50HZ/60HZ
- Output voltage: 36V
- Output Current: 5A
- Output Power: 180W
- Modulation: Pulse width modulation
- Noise ratio:≤200MV
18650 Polymer Lithium ion Charger Type C to 3S 12.6V 4A Booster Module
- Charger Type C 18650 Polymer Lithium Ion to 3S 12.6V 4A Booster Module
- Simple to employ
- Simple to set up
- High calibre item







Motors