Showing 1189–1200 of 2373 results
Shop
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
- Sensitivity of the output: 1.0 ± 0.1 mV / V.
- Two differential input channels that can be selected.
- Active low noise PGA on-chip that may be adjusted to have a gain of 32, 64, or 128.
- On-chip oscillator with an optional external crystal that doesn’t require any external components.
- Reset the power on the chip.
- Resolution of Measurement: 24 bits.
HX711 Load Cell Module
HXT 3.5mm Gold Connector with Protector Male-Female 2-Pairs (4pcs)
- Better locking on the insulating covers.
- Tip of Gold Plated Connectors.
- Superior construction and materials by Amass.
- Strong resilience to large amps of heat. Current.
- It can support wires up to 10 awg.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
HXT 4mm Gold Connector with Protector
A great method to prevent power shorts is this. Use these to maintain the orderliness and safety of your connections! It’s a great substitute for Deans T-connectors. Good for wire thicknesses up to 10AWG. stronger connection and simpler to solder than Deans T-plugs
HXT 4mm Gold Connector without Protector-1Pair
- Type of Connector: HXT 4mm
- Composition: Brass
- Rated Power: 500V, 90A
- Gold plating
- Connector Compatibility: Up to 10AWG
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Hybrid bike Conversion Kit 60-72V 1.5KW
- Motor Size: 17×2.75
- Magnet Height: 40H, 24 pole pairs
- Stator: Iron Core
- Rated Power: 1500W
- Speed: peak 70KPH
- Work Voltage Range: 60V-72V
- Peak Current: 80A
- Torque: 140-180N.m
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
I2C ADS1115 16 Bit ADC 4 channel Module with Programmable Gain Amplifier
- Low Current Consumption
- Pin Selected I2C Addresses
- Four Single-Ended or Two Differential Inputs.
- Operating Voltage: 2-5.5VDC
I2C Bi-Directional logic Level Converter- 4 Channel
- Material: metal and ABS
- Measurements: L x W x H = 16 x 13 x 3 mm; Weight: 2 grammes
- Four logic channels and high-voltage low-voltage logic can mutually transition between 3.3V and 5V TTL.
- Lightweight and portable, with two rows Six-pin contact pins
ICE Tower CPU Cooling Fan for Raspberry Pi 4 & 3 Best Heat Dissipation
- Support Raspberry Pi 4B/3B+/3B
- DC 5V Power in (Can be powered by the Raspberry Pi)
- ICE Tower Structure
- 5mm copper tube
- Super heat dissipation
- Rated power 0.4W @5V, 0.08A
- Super cool fan background light
- Easy to setup
ICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module
- 2.5–5.25 V is the operating voltage.
- Temperature Range for Operation: 20–70°C
- Plastic is the material.
- Electronic Circuits is the application.
- Measurements: LxWxH = 28 x 22 x 8 mm
- Weight: 2 grams.
IIC/I2C Serial Interface Adapter Module (Made In India)
- 5 volts for power supply.
- PCF8574 is used to control an LCD display serially using I2C.
- Through a jumper on the board, backlighting can be turned on or off.
- using a potentiometer to control contrast.
- Eight modules can be connected to a single I2C bus (address changes are possible with solder jumpers).
IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
- Input: 50/60Hz, 100v or 240v A/C
- Number of Cells: 2-3s
- Type of Battery: LiPoly
- Current Output: Three 800mA
Load more products
Loading...