Showing 133–144 of 511 results
Shop
9*12mm 10mH DIP Power Inductor (Pack of 5)
- Small size.
- High Q factor.
- High self-resonance frequency.
- Small magnetic flux leakage.
- Magnetically shielded.
- RoHS free.
9V 10cm Battery Connector
- Composed of robust leather.
- Superb craftsmanship and material quality.
- This 9V battery buckle is environmentally friendly.
- 15cm is the length of the wire.
- Black in colour.
9v Battery Snap Connector + DC Jack(Battery Connector Cap) – 2pcs
- Outstanding content
- It is a 9V battery buckle for the environment.
- Length of Cable: approximately 12 cm.
- Easy to use when attaching a battery to your device.
- Conserve energy and safeguard the environment.
- Excellent electrical conductivity and a pleasantly soft touch
9V Original HW High-Quality Battery-5Pcs.
- Steady 9 V output for the duration of the metal jacket body’s good construction, making it leakproof
- Simple to replace and install
- Connector point free of corrosion with zero mercury and cadmium for extended use.
- Eco-friendly OEM compatibility.
A2212 1000 KV BLDC Brushless DC Motor for Drone
- Motor KV: 1000
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
- Prop Adapter is quality tested before shipping to customer
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
AD8232 ECG Monitor Sensor Module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 5 mm Jack for Biomedical Pad Connection.
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
ADXL335 Module 3-axis Analog Output Accelerometer
- LDO voltage regulator on board
- Interfaceable with a microcontroller operating at 3V3, or 5V.
- Double or Tap Tap Detection
- Free-Fall Identification
- Analogue output
- Integrated linear LDO voltage regulator with extremely low noise
- Onboard filters that are integrated and lower noise levels from High-current electronics and motors
- Energise LED
ADXL345 Tripple Axis Accelerometer Board
- Voltage of supply: 3.3 V/5 V.
- Interface Type: SPI and I²C.
- ±2g, ±4g, ±8g, ±16g is the sensing range.
- Sensitivity: 34.5 LSB/g for Z, 31.2 LSB/g for Y, and 28.6 LSB/g for X.
- Ultra Low Power: 0.1µA in standby at 2.5V and 40µA in measuring mode.
- Fall-Free Detection.
- Double or Tap Tap Detection.
All Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs
Glue Sticks can be used for various everyday gluing projects, also used in electronics projects for various applications. These glue sticks can be used in all hot melt Glue Guns that have a working temperature around 200 °C and accept sticks with 11 mm diameters.
- Diameter: 11mm
- Length: 190mm
Load more products
Loading...







Motors