Showing 1621–1632 of 4073 results
Shop
EMAX XA2212 980KV Outrunner Brushless DC Motor
- Framework: 12N14P
- KV: 980KV
- LiPO Batteries: 2-3S
- Max. thrust: 880gm
- Shaft: 3mm
- Propeller: 9-10″
ENC28J60 Ethernet Module
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Automatic Programmable Retransmit on Collision
- Programmable Padding and CRC Generation
- Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- Chipboard ENC28J60/SS.
- The board 25MHZ crystal.
- The network interface board HR911105A.
- 3.3 V power supply pin.
- Stable performance.
- For Arduino, SPI, AVR, PIC, LPC, STM32.
ENC28J60 Ethernet Module(10 Pin Package: SSOP)
- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 5V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
Encapsulated DC Vibration Motor, 7 mm Diameter , 25mm Length
- Encapsulated DC Vibration Motor
- Motor Color: Gold
- Motor length: 25mm
- Motor Diameter: 7mm
ENVIE® (9v Infinite) Ni-Mh 300mAh Capacity Ready to Use Rechargeable Battery
| Brand | Envie |
|---|---|
| Manufacturer | Shenzhen, China |
| Model | 9V |
| Product Dimensions | 10 x 3.3 x 14 cm; 32 Grams |
| Batteries | 1 9V batteries required. (included) |
| Item model number | 9V |
| Compatible Devices | Camera, Toy, Torch |
| Mounting Hardware | 1 No 9V Battery |
| Voltage | 9 Volts |
| Batteries Included | Yes |
| Batteries Required | Yes |
| Battery Cell Composition | NiMH |
| Battery Power Rating | 300.00 |
| Manufacturer | Shenzhen, China |
| Country of Origin | China |
| Item Weight | 32 g |
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- This has an XT60 plug to connect a battery.
- This Distribution board has 8 number of the channel to connect different ESCs with 3.5mm Banana Bullet Connectors
eSilk-PLA filament Rainbow Multicolor
- Outstanding transparency, biocompatibility, and environmental friendliness
- Good round form and minimal shrinking
- Diameter accuracy (±0.02mm)
- Shiny, capture your eyes
- Simple to print with reliable printing results
- There are several colours to choose from.
- Completely biodegradable and FDA-approved for food safety
ESP Intermediate Kit
ESP Starter Kit
- All in one kit for ESP 8266 Based IoT Project
ESP WROOM 32 MCU Module
- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
ESP WROOM 32 MCU Module Version: 1.1
- Ultra-low-power management.
- Version: 1.1
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
ESP-01 Adapter 3.3V 5V Board
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
Load more products
Loading...