Showing 1633–1644 of 4073 results
Shop
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
ESP-12F ESP8266 Wifi Wireless IoT Board Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
ESP32 38-Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP-32 ESP-32S ESP 32 Similar ESP8266 – RS4914
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
- Product: ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
- Wi-Fi antenna
- Onboard 32MByte Flash
- 0.96-inch blue OLED display
- lithium battery charging circuit and interface
- CP2102 USB to serial port chip
ESP32 Programmer Board
ESP Prog Pinout
- 3.3V DC (100mA Max.)
- TXD
- RXD
- GND
- Reset/RTS
- Boot/DTR
- GND
- 5V DC (500mA Max.)
ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
ESP32-S2 Dual USB Port Development Kit With NeoPixel LED By VICHARAK
Overview
• Development board of ESP32-S2
• Can be used to evaluate Development Purpose WiFi, USB OTG, NeoPixel LED, PCB Antenna with External WiFi UFL Connector
Load more products
Loading...