Showing 169–180 of 511 results
Shop
Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, without cover
- Organise two regular 18650 batteries.
- 15 cm is the length of the wire.
- 7.2 volts at output.
- Measurements (approximately): 76 x 40 x 20 mm
- Weight: 12g
- Superior grade of plastic
Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover
- Capture three regular 18650 batteries.
- 15 cm is the length of the wire.
- 11.1 V is the output.
- Measuring approximately 76 x 60 x 18 mm.
- 18 grammes in weight.
- superior grade of plastic
Bluetooth Controlled Robot
BMP180 Digital Barometric Sensor Module compatible with Arduino
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6VÂ would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C : ±0.12hPa and ±1.0m.
BTA41-600B Triac
- Product Number: BTA41-600BTriac
- Voltage (V): 600 Peak Repetitive Off-State
- Peak Current of Gate (A): 8
- RMS Current (A) on-state: 40
BZX55C4V7 1/2W Zener Diode (Pack of 40)
- Range of Zener Voltage (V): 4.4 to 5
- Leakage Current in Reverse (μA): < 0.1
- Storage Temperature Range: -65 to 175°C
Cable For Arduino Nano USB A to MINI B (Nickel Plated Connector)-1.2 M
- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.2 m.
- Nickel Plated Connector
- Exclusively designed for Arduino boards.
Cable for Arduino UNO/MEGA (USB A to B)-1M
- USB Type: Type-A to Type-B
- Weight: 80 gm.
- Length: 1.4 m.
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Capacitive Soil Moisture Sensor
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
- The body is acrylic.
- Simple to set up.
- Appealing shade of blue.
Load more products
Loading...







Motors