Showing 193–204 of 2388 results
Shop
280 Diaphragm 3.7V Self-Priming Small Micro-pump Tea Fitting Metering Pump
- superior quality and brand new.
- Compact yet powerful.
- minimal energy usage and maximum effectiveness.
- Suitable for use as a vacuum, water, diaphragm and suction pumps.
2805 140KV Gimbal Brushless Motor
- Black in colour
- Measuring 34.5 by 14.5 mm
- Hole in shaft: 5.4 mm
- 40 grammes in weight
- Length of cable: 123 mm
- Capacity of load: 100-300 grams
298N Dual H Bridge DC/Stepper Motor Driver Controller Module
- Driver chip: Dual H Bridge L298N
- Peak current: VMS 5V to 35V
- Supply voltage IO: Two amps per bridge
- Maximum power used: 20 watts
- Includes four LEDs to indicate the control logic’s condition.
- Every motor has its own independent direction, speed, and brakes.
2mm Gold Connectors-3 Pairs (6pcs.)
- Rated Amperage: 40A
- Measurement in diameter: 2 mm
- Composition: Brass
- Gold plating
- Length: 12.5 mm per unit
- Measurement in diameter: 2 mm
- Pair’s weight is 0.4 grammes.
2S 20A 18650 Lithium Battery Protection Board
- Range of the Over Charge Voltage: 4.25–4.35 V + 0.05 V
- Range of Over Voltage: 2.5–3.0 V + 0.05 V
- Maximum Amplified Current: 13 A
- Maximum Allowable Current: 20 A
- 8.4–9 V is the charging voltage.
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module
- Voltage for detecting over-discharge: 2.3 ~ 3.0 ± 0.05V.
- 3A is the maximum working current.
- Current Transient: 5A.
- Temperature range for operation: -40 to +80°C.
2S-6S Lipo Battery USB Converter T Plug Cellphone Charger Adapter
- 6–26 VDC input (two S–6 S LiPo batteries)
- 5 V to 2 A DC output
- Enter Data Type of Connector: Male T plug
- USB 7-Segment LED Display for Battery Voltage Monitoring as the Output Interface
- Non-slip plug with excellent contact efficiency
- Accurate display thanks to TW-programmed MCU
2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery
- Product Type: Board Amplifier
- Make: HF69B
- Supply Voltage: 3.7V lithium battery or 5V DC
- Relevant Speaker Impedance: 4, 6, and 8 ohms
- Charging Interface: A single lithium battery can be charged via the charging interface utilising a mobile phone charger or a 5 volt power source when utilising a lithium battery.
3 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control
- Input: AC 220V-240V 50Hz/60Hz
- Remote Battery: 12V 23A
- Incandescence lamp: ≤1000W
- Energy-saving lamp: ≤200W
- Number of energy-saving lamps: ≤6
- Compact fluoresce twin-tube: ≤280W
- Number of twin-tube: 6
- Remote control distance: 10M-50M
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
- Protection board for 3S 11.1V 12.6V 40A 18650 lithium batteries (includes AUTO Recovery function)
- Use: 3.6V nominal voltage, 3.7V lithium battery (which includes the polymer lithium battery 18650.26650)
- Continuous discharge current (maximum limit): 40A (please use less load current if the cooling environment is not suitable).
- Upper limit for continuous charge current: 20A
3 x 1.5V AAA battery holder with cover and On/Off Switch
- Capable of storing three AAA batteries.
- Covered and locked up.
- Has an ON/OFF switch included.
- 15 cm is the length of the cable.
- Series is the internal connection.
3 x 1.5V AAA Battery Holder Without Cover
- Three cells in total
- AAA is the type of battery.
- 25°C is the storage temperature.
- Max Temperature of operation: 80ºC.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Load more products
Loading...







Motors