Showing 2029–2040 of 2373 results
Shop
ST-LINK V2
- This ST Link programmer is equipped with a 500MA internal resettable fuse
- It has a red and blue LED indicator that allows users to observe the working condition of the ST Link V2 Programmer.
ST3232EBTR
Part Number: ST3232EBTR
Make: STMicroelectronics
2/2 Transceiver Full RS232 16-TSSOP
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
Standard 24V 2.5A 60W Power Supply with 5.5mm DC Plug
- Voltage input: 100–260 VAC, 50 Hz
- 24 V 2.5 A output
- Indian three-pin plug type
- Size of the Adapter Output Plug: 5.5mm
- Total Length including Cable: 2.75 metres
Standard 5V 3A Power Supply with Micro USB Plug
- Voltage (V) of input: 100–280 VAC at 50–60 Hz.
- Current input (mA): 100.
- Power Output: 5V/3A.
- Regulation of load (%): ±5.
- Plug type for input: EU 2-pin.
- Micro USB plug is the output plug.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Standard 60 Watt Corded Glue Gun with 5 Glue Sticks
- Comes with an On/Off Switch
- Feed Type Trigger-fed Gun
- Rated Power: 60 W
- Heating Up Time: 5 min
- Cord Length: 1 Mtr.
- Aluminum Tip
- Replaceable Cartridge(Glue Sticks)
- Specific Uses of the Product Wood, Plastics, Textiles, Cardboard, Ceramics, Leather, etc
Standard Temperature 40 Watt Hot Melt Glue Gun with On/Off Switch
- Voltage: 110-220V
- Power consumption: 40W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 40 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
Standard Temperature 60Watt Hot Melt Glue Gun with On/Off Switch
- Voltage: 110-220V
- Power consumption: 60W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 60 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
STC-1000 DC12V Digital Temperature Controlled Thermostat Switch
- Mini temperature controller.
- With a clear LED display for better readability.
- Wide temperature measuring range.
- Dual heating and cooling control.
- Automatic over-temperature alarm
- Relay output.
- High Control precision 0.1 centigrade
STC-3008 DC24V Dual Display Temperature Adjustable Temperature Controller with 1M Cable
- The STC-3008 model
- Voltage Option: 24VDC
- Range of Temperature Control: 110 °C
- Dual Screen Dual Display
- Sensor: 2*NTC Sensor (about 1 metre in line length)
STC-3028 DC12V Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
- The STC-3008 model
- Voltage Option: 12VDC
- Temperature Control: 0 to 100 degrees Celsius
- Dual Screen Dual Display: Screen Display
- One NTC sensor (with a line length of roughly one metre)
Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B
- Wide 5V to 12V Operating Voltage.
- Four Brushed DC Motor Bidirectional Control.
- Two Stepper Motor Control.
- Maximum Peak Current 3A
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Thermal Shutdown Protection
Load more products
Loading...