Showing 217–228 of 2388 results
Shop
300 RPM BO Motor-Straight
- Low density equals low mass and inertia.
- Ability to take in vibration and stress thanks to elastic compliance.
- Because of its natural lubricity, it can function with little to no lubrication.
- The low coefficient of friction in comparison.
- Voltage drop (VDC): 3–12 Shaft Length: 8.5 mm Shaft 5.5 mm in diameter (Double D-type)
- Current without load: 40–180 mA.
- 300 RPM is the rated speed (after reduction).
- Torque Rated: 0.35 kg cm
300 RPM Dual Shaft BO Motor-Straight
- Low density equals low mass and inertia.
- Ability to take in vibration and stress thanks to elastic compliance.
- Because of its natural lubricity, it can function with little to no lubrication.
- The low coefficient of friction in comparison.
- Voltage drop (VDC): 3–12 Shaft Length: 8.5 mm Shaft 5.5 mm in diameter (Double D-type).
- Current without load: 40–180 mA.
- 300 RPM is the rated speed (after reduction).
- Torque Rated: 0.35 kg cm.
3007 PI-Fan 30 x 30 x 7MM Black 2 x 1p
- Ideally suited for the extruder
- Silent Performance
- Extremely low usage of current
- Simple to connect to and install.
300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw 304 stainless steel is the material.
Dimensions: 300 mm in length.
8 mm in diameter.
Brass Nut with 4 Start Lead Screw Dimensions: 10 x 13 x 22 mm.
mostly used to drive guide rails using stepping motors.
T-shaped design, composed of premium stainless steel.
Both convenient to use and simple to install.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
300RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
- Speed: 300 RPM
- Operating Voltage: 12 V
- Rated Torque: 1.2 Kg-cm
- Stall Torque: 3.5 Kg-cm
- Load Current: 0.3 A
30A Range ACS712 Current Sensor Module
Features :
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- 5.0 V, single supply operation
- 66 to 185 mV/A output sensitivity
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
30CM Male to Male Servo Lead (JR) 26AWG (1pcs/set)
- Product: Male to Male Servo Lead
- Connector Type: JR Servo Male to Male
- Cable Length (cm): 30
- Cable Size (AWG): 26
- weight: 4g
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
30cm Micro USB To iPhone Connector For Dji Mavic Pro & Spark Remote Controller
- Interface of the phone body: iPhone/iPad
- Function: Link iPhones and the DJI Spark remote control.
- Material: Highly flexible and stable PVC and nylon cable.
- About 30cm of cable; 9.1g in weight.
- The remote controller’s length is ideal for your gadgets.
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
- Interface on the phone body: Micro USB
- Function: Link to a Micro USB port on smartphones or tablets and the DJI Spark remote control.
- Material: Highly flexible and stable PVC and nylon cable.
- About 30cm of cable; 9.1g in weight.
- The remote controller’s length is ideal for your gadgets.
30CM RP-SMA Female to IPEX4 Connector Cable 11mm RG0.81
- RP-SMA Female to IPEX4 Connector Cable Thread
- Cable Length: 30cm
- Cable Type: RG0.81
- Connector Length: 11mm
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
30CM Servo Lead Extention (Futaba) 26AWG – 2pcs
- Item: 30 cm Servo Lead Extension
- Length of cable (cm): 30
- AWG cable size: 26
- weight: about 4
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
30cm USB 2.0 B Female Socket, Printer To B Male Plug Panel Mount, Extension Cable
- Male USB B type on one side
- Panel mount USB B female with 28AWG+Braid cable on the opposite side
- 30 cm is the length of the cable.
- Size of fitting screw: M3
Load more products
Loading...







Motors