Showing 2269–2280 of 2373 results
Shop
Waveshare Industrial RS232/RS485 to Ethernet Converter (EU) (Without Power Adapter)
- Rate of communication: 10/100 Mbps
- Baudrate: 600bps–230.4Kbps
- Voltage: 5.0–36.0V; Power supply
- 86.5mA of operating current (@5V)
- Power usage: less than 1W
Waveshare Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits
- Brand: Waveshare
- Product: Industrial USB TO RS485 Bidirectional Converter
- Device Port: RS485
- Baud Rate: 300bps ~ 3Mbps
- Operating voltage: 5V
- Connector: USB-A
Waveshare Industrial-grade Isolated 8-ch RS485 Hub, Rail-mount Support, Wide Baud Rate Range
- Economical
- Physical Interface: Screw Terminal RS485
- Self-adaptive Baudrate: 300–460800 bps
- Supported Nodes: Up to 32 nodes can be supported by each RS485 port.
- 1200 metres of communication distance (9600 bps); the closer the distance, the higher the rate.
Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
- Operating Voltage 3.3V
- Expanded Interface 2-Ch RS485 + 1-Ch CAN
- Communication Interface SPI
- CAN Controller MCP2515
Waveshare M.2 NGFF SATA to 5-Ch SATA3 Expander, JMB575 control chip
- Supported Hard Drives: SATA-compatible HDDs and Solid State Drives.
- Interface for transfer: M.2 B-key, SATA female port × 5. 6Gbps is the transfer speed for SATA3 male port x 1.
- System software: Linux / Windows
- Measurements: 80.0 x 22.0 mm
Waveshare PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
- Interface: PCI-E×1 Gen2
- Compatibility: Raspberry Pi 5B
- Supported SSD Sizes: 2230/2242
- Indicators: Power (PWR), Activity (ACT)
- Design: HAT+ with onboard EEPROM chip
- Power Monitoring: Onboard chip for real-time status
- NVMe Boot: Not supported
Waveshare PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5, PCIe to USB HUB, 4x High Speed USB Ports, driver-free, plug and play, HAT + Standard
- High-Speed USB 3.2 Gen1 Connectivity
- 4x High-Speed USB Ports
- Driver-Free Operation
- Plug and Play Functionality
Waveshare Pioneer600, Raspberry Pi Expansion Board
- AD/DA IO interface : screw terminal
- 1-WIRE interface : for connecting 1-WIRE devices like DS18B20
- Sensor interface : for connecting various sensors
- 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface
- Buzzer
- CP2102 : USB TO UART converter
- PCF8591 : 8-bit AD/DA converter, I2C interface
Waveshare PL2303 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
- Adopts the new device version PL2303GS
- Compatible with Windows XP/7/8/10/11/
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare Power Management HAT for Raspberry Pi
- Main Controller Rp2040
- Communication Interface Uart + Gpio
- Communication Baud Rate 115200bps By Default (Configurable)
- Power Supply Interface USB Port Or Ph2.0 Connector
- USB Power Input Voltage 5v
Waveshare Power over Ethernet HAT (E) for Raspberry Pi
- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
Waveshare Raspberry Pi 400 GPIO Header Adapter Header Expansion
- Product: Waveshare Raspberry Pi 400 GPIO Header
- Model: PI400-GPIO-ADAPTER-A
- Connectivity Technology: GPIO
Load more products
Loading...