Showing 2281–2292 of 2404 results
Shop
Waveshare 7inch Capacitive Touch Screen LCD (C), 1024×600, HDMI
- 7-inch IPS screen with a hardware resolution of 1024 × 600.
- 5-points capacitive touch control.
- When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie
- Use as a computer monitor, it supports Windows 11 / 10 / 8.1 / 8 / 7, five-point touch, no need to install any drivers.
- Support backlight control, more power saving.
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
Waveshare Adapter Board for Arduino and Raspberry Pi
- Onboard CP2102 USB TO UART converter
- TLC1543: AD converter
- PCF8563 : RTC
- 32.768KHz crystal: for RTC
- RTC battery holder: for the CR1220 button battery
Waveshare AS7341 Spectral Color Sensor, Visible Spectrum Sensor, Multi Channels, High Precision, I2C Bus
- Chip: AS7341
- Interface: I2C
- Supply voltage: 3.3 V or 5 V
- Dimensions: 30 x 23 mm
- Mounting hole: 2 mm FOR BULK B2B ENQUIRIES MAIL US @ibots.in
Waveshare AW-CB375NF Dual-Band Wireless NIC, 2.4G/5GHz Dual-Band WiFi 5, RTL8822CE-CG Core, Bluetooth 5.0, Supports BLE
- allows for dual-band 2.4G/5GHz operation, with a maximum speed of 300 Mbps in the 2.4G band and 867 Mbps in the 5GHz band.
- Adopts NGFF (M.2 A/E Key) interface
- supports Bluetooth 5.0 standard; compatible with Bluetooth 2.1+EDR
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
- Product Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long-range communication through SPI
- Operating Voltage 3.3V~5V
- CAN Controller MCP2515
- CAN Transceiver SIT65HVD230DR
- Communication BUS SPI
Waveshare Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi, Based On A7670E module, LTE
- LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20
- 2G :GSM/GPRS/EDGE: 900/1800 MHz
- GNSS :GPS, BeiDou, GLONASS
- Power supply: 5V (via USB port or 5V pin header), 3.7 ~ 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- Operating voltage: 3.3V.
Waveshare Compute Module IO Board Plus, for Raspberry Pi CM3 / CM3L / CM3+ / CM3+L
- Voltage regulator: 3.3V / 2.5V / 1.8V
- ACT indicator: indicating the Micro SD card status
- TLC1543: AD converter
- DAC8552: 16-bit DAC, 2-ch
- Compute Module interface: for connecting Compute Module (CM3 / CM3L / CM3+ / CM3+L)
- Compute Module GPIO header: breakout all the Compute Module pins
Waveshare DC Motor Driver Module for Raspberry Pi Pico Driving up to 4x DC Motors
- Operating voltage: 6~12V (VIN terminals)
- Logic level: 3.3V
- PWM driver: PCA9685
- Motor driver: TB6612FNG
- Control interface: I2C
- Dimensions: 65 x 56mm
Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 CM4, with Antenna Notch
- Name: Waveshare
- Item: Heatsink made of aluminium
- Fit for: Raspberry Pi
Waveshare Dual ETH Mini-Computer For Raspberry Pi Compute Module 4 (Without Power Adapter)
- Model: Waveshare Dual ETH Mini-Computer
- Power input: 7-36V
- USB: USB 2.0 Type A
- Connector: Isolated RS485 , Power screw terminal
- Video: HDMI port , supports 4K 30fps output
- Networking: Gigabit Ethernet RJ45 connector,
Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
- Adopts ESP32-S3R2 as the main chip.
- Comes with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory.
- Type-C connector, easier to use.
Load more products
Loading...