Showing 2293–2304 of 2404 results
Shop
Waveshare FT232RL USB TO RS232/485/TTL Interface Converter, Industrial Isolation
- Type of product: optically isolated industrial converter
- 300-921600 bps is the baudrate.
- USB host port
- Port of the device: RS485/RS232/TTL
- Computer operating system: Windows 8.1, 8/Windows 7, XP
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
- Support GPS, COMPASS, Glonass, LBS Base Station Positioning, Omni-Positioning
- Bluetooth 3.0, Supports Data Transferring Through Bluetooth
- Onboard USB To UART Converter CP2102 for UART Debugging
- Compatible With Raspberry Pi Model Zero,3B/3B+,4
Waveshare IMX219-120 Camera, 120° FOV, Applicable for Jetson Nano
- Model: Waveshare IMX219-120 Camera
- Sensor: IMX219
- Megapixels: 8
- Aperture (F): 2.0
- Focal Length: 1.79mm
- Angle of View (diagonal): 120 degree
Waveshare IMX219-160 8MP IR-CUT Camera,162° FOV, Applicable For Jetson Nano / Compute Module
- Camera: IMX219-160 8MP IR-CUT Camera
- Operating voltage: 3.3V
- Pixels: 8MP
- Sensor: IMX219-160
- Sensor size: 1/4 inch
- Resolution: 3280 × 2464
- Focal length: 1.75
Waveshare Industrial 4G DTU, RS485 TO LTE CAT4, DIN Rail-Mount
- Model: RS485 TO LTE CAT4 (EU)
- Input Voltage: 9V~36V
- Applicable regions: EMEA, Korea, Thailand, India, Southeast Asia
- LTE Category: LTE Cat.4
Waveshare Industrial grade USB HUB , Switchable dual hosts, Multi Protections
- Standard High-Speed USB 3.2 Gen 1
- Data Rate Up To 5gbps
- USB Output 5v@imax:1.2a, Usb-a Connector
- USB Hub Input 5v, Switchable Dual Usb-a Connectors
- External Power Dc Power Supply Terminal 7~36v
Waveshare Industrial Modbus RTU 8-Channel Relay Module RS485 Bus, Multi Protection (Without Power Adapter)
- Power supply voltage: 5V
- Communication interface: RS485
- Relay channels: 8
- Contact form: 1NO 1NC
- RS485 address: 1~255
- Communication protocol: Standard Modbus RTU protocol
Waveshare Industrial RS232/RS485 to Ethernet Converter (EU) (Without Power Adapter)
- Rate of communication: 10/100 Mbps
- Baudrate: 600bps–230.4Kbps
- Voltage: 5.0–36.0V; Power supply
- 86.5mA of operating current (@5V)
- Power usage: less than 1W
Waveshare Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits
- Brand: Waveshare
- Product: Industrial USB TO RS485 Bidirectional Converter
- Device Port: RS485
- Baud Rate: 300bps ~ 3Mbps
- Operating voltage: 5V
- Connector: USB-A
Waveshare Industrial-grade Isolated 8-ch RS485 Hub, Rail-mount Support, Wide Baud Rate Range
- Economical
- Physical Interface: Screw Terminal RS485
- Self-adaptive Baudrate: 300–460800 bps
- Supported Nodes: Up to 32 nodes can be supported by each RS485 port.
- 1200 metres of communication distance (9600 bps); the closer the distance, the higher the rate.
Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
- Operating Voltage 3.3V
- Expanded Interface 2-Ch RS485 + 1-Ch CAN
- Communication Interface SPI
- CAN Controller MCP2515
Waveshare M.2 NGFF SATA to 5-Ch SATA3 Expander, JMB575 control chip
- Supported Hard Drives: SATA-compatible HDDs and Solid State Drives.
- Interface for transfer: M.2 B-key, SATA female port × 5. 6Gbps is the transfer speed for SATA3 male port x 1.
- System software: Linux / Windows
- Measurements: 80.0 x 22.0 mm
Load more products
Loading...