Showing 2533–2544 of 4062 results
Mini 360 Step-Down Buck Converter Power Module
Original price was: ₹82.60.₹57.82Current price is: ₹57.82. (Incl. GST)- The non-isolated step-down module is known as BUCK.
- Voltage input: DC 4.75V–23V
- DC 1.0V–17V (adjustable, output < input) is the output voltage.
- Correction: Coordinated correction
- Integrated thermal shutdown of 160°C
- 30 mV of output ripple (no load)
MINI 3PI car N20 Caster Robot Ball Wheel
Original price was: ₹160.48.₹105.02Current price is: ₹105.02. (Incl. GST)- Dimensions: Height x Diameter: 22 x 15 mm
- Ten grammes in weight
- Material for Body Case: Plastic Ball Content: 304 Grade Stainless Steel
- Use: with the MiniQ robot
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
Mini A6 GSM Development Board With GPRS Quad-Band SMS Audio Board 5V Replace SIM800L
Original price was: ₹849.60.₹660.80Current price is: ₹660.80. (Incl. GST)- Sensitivity <-105
- Supports voice calls
- Support news SMS
- Supports GPRS data services, maximum data rate, download 85.6 kbps, upload 42.8 kbps
- Support GSM / GPRS quad-band frequency bands, including 850, 900, 1800, 1900MHZ
Mini APM3.1 Flight Controller with Power Module for Multicopter FPV
Original price was: ₹5,251.00.₹4,330.60Current price is: ₹4,330.60. (Incl. GST)- 8 Channel PWM input
- 8 motor outputs
- 12-way Auxiliary input and output
- Supports GPS, compass, telemetry and power module
- Onboard connections JST-SH with 1.0mm pitch
- Compatible with official Firmware and Groundstation.
Mini Bluetooth audio digital USB power amplifier board
Original price was: ₹470.82.₹407.10Current price is: ₹407.10. (Incl. GST)- Amplifier Chip: PAM8403
- Operating Voltage: DC 5V.
- Output Power: 2x 3W.
- Applicable Speaker Impedance: 4/6/8 ohm
- PCB Board Size: 42 x 25 x 5 .
Mini Car LCD Battery Voltage Meter Monitor 12V Black
Original price was: ₹293.82.₹206.50Current price is: ₹206.50. (Incl. GST)- Type of Display: Only Digital
- Range of Measurement: DC 8V-30V
- Precision Level: +/-%1.2.
- Temperature range for operation:-10 ℃ to 65 ℃
- Measurements: 7 cm by 4 cm by 2.9 cm
Mini DC-DC Boost Converter 0.9V~5V to 5V 600MA USB Output charger step up Power Module
Original price was: ₹102.66.₹53.10Current price is: ₹53.10. (Incl. GST)- Voltage input: 0.9–5 V DC
- Voltage output: 5 volts DC
- Current Output: 500–600 mA
- Regulation of load: ±1%
- Regulation of voltage: ±0.5%
- Frequency of switching: 500 KHz
Mini Digital Amplifier module USB Charger 3W Dual Track with cable
Original price was: ₹317.42.₹223.02Current price is: ₹223.02. (Incl. GST)- Input Voltage: 2.5-5.5 V(USB power supply).
- Output Impedance: 4 ohms.
- Efficiency: 90%.
- Frequency Response: 150 Hz – 20 kHz.
- Input Impedance: 2 Kohm.
Mini Digital Power Amplifiers 3W Dual Track Red PAM8403
Original price was: ₹115.64.₹69.62Current price is: ₹69.62. (Incl. GST)- Voltage input: 2.5–5.5 V (using a USB power source).
- 4 ohm is the output impedance.
- 90% efficiency.
- Response to Frequency: 150 Hz-20 KHz.
- Impedance of Input: 2 Kohm.
- Measurements: 15 x 20 mm.
Mini HDMI To HDMI Cable 1 Meter Round High-Quality Copper-Clad Steel Black
Original price was: ₹177.00.₹142.78Current price is: ₹142.78. (Incl. GST)- Length: 1 M.
- Weight: 48 gm.
- Color: Steel Black
- High-Speed HDMI
- Fully shielded audio and video lines for optimum reduction of electromagnetic interference.
- 3d Transmission due to extending bandwidth.
- Maximum Digital Resolutions: 4K x 2K @ 30 Hz
mini led light ultra-thin ultra-light portable usb small led lamp camping night light
Original price was: ₹53.10.₹35.40Current price is: ₹35.40. (Incl. GST)- Lamp shape: Patch light
- Lamp cover material: Plastic
- Lampholders Material: Synthetic
- Switch Type: No Switch
- Voltage: 5 V
Mini Micro SD Card Reader Module
Original price was: ₹295.00.₹177.00Current price is: ₹177.00. (Incl. GST)Add the desired memory to your project to store the data, Media etc. This Mini Micro SD Card Reader Module also called Micro SD Adaptor which is designed for dual I/O voltages. The Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Not only with Arduino but can also be used with other microcontrollers development boards.
Micro SD Card Reader Module has an SPI interface which is compatible with any sd card and it uses 3.3V power supply which is compatible with Arduino UNO/Mega.SD module has various applications such as data logger, audio, video, graphics.
There are total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply.
With this Module, general AVR microcontroller system can read the signal
Features:
- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
- Maximum voice storage: 512 voice
- Operating voltage: DC 2.6 to 3.6V
- Quiescent current: 16 μA (SD card is not inserted)
