Showing 2797–2808 of 4062 results
Shop
Original Arduino Due Board A000062
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
Original Arduino Nano 33 BLE Sense Rev2 ABX00069
- Processor: nRF52840 (datasheet)
- Microcontroller: nRF52840
- Security: ECC608 crypto chip
- Flash: 1MB
- RAM: 256KB
- Circuit voltage 3.3V
- Sensors onboard: digital microphone, 6-axis accelerometer, pressure humidity, temperature, gesture recognition.
Original Arduino Nano 33 IOT ABX00027
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU (Datasheet)
- Radio module: u-blox NINA-W102
- Secure Element: ATECC608A
- IMU: LSM6DS3
- Clock Speed: 48MHz
- Operating Voltage: 3.3V
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano Every ABX00028
- Manufacturer: Arduino
-
MCU: ATMega4809
-
Clock Speed: 20MHz
-
Flash: 48KB
-
EEPROM: 256byte
-
SRAM: 6KB
Original Arduino UNO R4 WiFi – 32-bit Microcontroller Development Board
The Original Arduino UNO R4 WiFi is a powerful 32-bit development board featuring a 48 MHz Arm Cortex-M4 microcontroller and an ESP32-S3 module for Wi-Fi and Bluetooth connectivity. It includes 256 KB Flash, 32 KB SRAM, an onboard 12×8 LED matrix, and multiple communication interfaces. Ideal for IoT applications, robotics, smart home automation, wireless sensor networks, and embedded systems development.
Original Arduino Uno Rev3 A000066
- Manufacturer: Arduino Officials
- Micro-controller : ATmega328P.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
Original Arduino Uno Rev3 SMD A000073
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Original JHD 16×1 Character LCD Display With Yellow Backlight
- Model: JHD651 Y/YG
- Shown: 16 by 1 characters; Outline: 80.0 by 36.0 by 14.5
- VA: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 3.20 x 6.35
- Driver: 1/16
Original JHD 16×2 Character LCD Display With Blue Backlight
- Model: JHD659 B/W
- 16 by 2 character display
- Sketch: 80.0 x 36.0 x 14.5
- Vector: 64.5 x 14.5
- Supervisor: SPLC780D
- Persona: 2.95 x 4.35
- Driver: 1/16
Original JHD 20×4 character LCD Display with Blue Backlight
- Model: JHD629 B/W
- Display: 20×4 character
- Outline: 98.0×60.0×14.0
- VA: 76.0×25.2
- Controller: SPLC780D
- Character: 2.95×4.75
- Driver: 1/16
Load more products
Loading...