Showing 289–300 of 2379 results
Shop
48V 1500W E-MOTOR BIKE CONVERSION KIT
- Type: BLDC Motor
- Construction: Permanent Magnet
- Commutation: Brushless DC motor
- Voltage(V): 48V
- continuous torque: 640 Kg-cm
- peak torque: 965 Kg-cm
- Continuous Speed(RPM): 2320RPM
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
48V E Bike Hub motor Kit 17 inch 1000W
It takes between two to six hours to assemble this 17-inch, 1000W 48V E bike hub motor kit. This hub motor can support loads of between 250 and 290 kg. The recommended Li-ion 48V 45 Ah or LFP battery to utilise with the 60V motor will be LIFEPO4.
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
4G Lte Gsm Modem (A7672S)
- Model Name/Number: A7672S
- Output Voltage:Â 3.4V ~ 4.2V
- Compact size with abundant interfaces
- Suitable for LTE and GSM networks
- Abundant software functions: FOTA, LBS, SSL
- Form factor is compatible with the SIM7000/SIM7070 series
4mm Al Coupling For 58mm Plastic Omni Wheel
- Used to connect the robot Wheel and a DC motor
- Material: Aluminum-alloy
- Outside diameter: 14.2mm
- Inside diameter For Motor Shaft: 4mm
- Net weight: 17g
4MM Male Banana Plug / Charge Plug (solder type)-1 pair
- Type of Plug: 4mm Banana
- Colours: Black and Red
- Gold-plated brass is the contact material.
- Cable Compatibility: 12AWG
- Rated Power: 50V, 16A
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
4pcs Hex Screwdriver
- Size: 1.5mm, 2mm, 2.5 mm, and 3 mm.
- Total Length: 72mm
- Shank Diameter: 2.90mm
- Shank Size: 45 mm
- Handal Diameter: 7mm
- Handal length: 23.15mm
- Material: Copper alloy
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
4S 10A 18650 Lithium Battery Protection Board
- HX-4S-A10 is the model.
- Li-ion cells in the 4 series are compatible with this protection board.
- Use an integrated circuit with precision to provide quick and secure charging.
- Provide support for short circuit, over discharge, and overcharge prevention.
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
- 4.25 ± 0.025V is the overcharge detection voltage.
- 4.15 ± 0.05V is the overcharge release voltage.
- 2.50 ± 0.08V is the over-discharge detection voltage.
- 3 ± 0.1V is the over-discharge termination voltage.
- Overcurrent: 20–30 A
- Current in use: 15A
4×1 matrix Keypad
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×1 type 4 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage(VDC): 12
- Current : 30 mA
5 in 1 Multi-Connector Charger Adapter, Banana Plug/Futaba/Tamiya
- JST Male
- T-type Male Plug
- Tamiya Male
- Futaba J Servo Male
- Pair of Bare Leads (Red & Black)
Note:
- Within India, 3 – 4 days lead time with 100% advance
- For imports, 15 days lead time with 50% advance
5 in 1 Pure Copper Heat Sink for Raspberry 4B
- Material: Pure Copper
- Suitable for: Raspberry pi 4B
- Colour: Copper
- Better heat dissipation than Aluminium heat Sink
5 Inch Touch Screen HDMI Interface TFT LCD for Raspberry Pi 3 model B + Touch Pen
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Very easy to assemble with Raspberry Pi.
Load more products
Loading...







Motors