Showing 3205–3216 of 4062 results
Shop
Replacement Arm for MARTIAN-III REPTILE 220mm Quadcopter Frame
- Material: Carbon fiber
- Weight:15 gm
- Size: 132×30 (LxW) mm
- Compatible Frame: Martian-III 220mm
Replacement Arm for Super Strong Q250 Quadcopter Frame
- Material: Carbon fiber
- Arm thickness: 4mm
- Weight: 10 gm
- Size: 115×25 (LxW) mm
- Compatible Frame: ZMR V2 250mm
RepRap MK2B 3D printers Dual Power PCB Heat Bed With 18AWG Cable
- Outside dimensions: 214 x 214 mm.
- The heat bed’s dimensions are 200 x 200 mm.
- 35μm copper in two layers.
- Holes Plated in Copper
- Excellent when used with Taurino Power or RUMBA.
- Energy Source: 12V or 24V DC
- 190 grammes in weight.
RF module RFM119W-433S1
- Min. Supply Voltage: VDD -0.3V.
- Mix. Operating Voltage: 3.6V.
- Frequency: 240 to 960 MHz.
- All Features Programmable.
- Two-wire Interface for Registers Accessing and EEPROM Programming.
- Low-Cost Consumer Electronics Applications.
RF module RFM119W-915S1
- Power Supply: 1.8V to 3.6V.
- Frequency: 240 to 960 MHz.
- Very Easy Development with RFPDK.
- All Features Programmable.
- Two-wire Interface for Registers Accessing and EEPROM Programming.
RF module RFM63W-868MHz
- Wireless sensor networks
- Automated Meter Reading
- Home and building automation.
- carrier frequency: 868MHz or 915MHz.
- , VDD: 3.3 V.
- : Temp: 25 °C.
RF module RFM63W-915MHz
- Max. Operating Supply Voltage: 3.6 V.
- Min. Operating Temperature: -40c.
- carrier frequency = 868 or 915 MHz,
- Wireless sensor networks
- Automated Meter Reading
- Home and building automation
- Industrial monitoring and control
RF Module RFM69HW-868S2R
- Automated Meter Reading.
- Wireless Sensor Networks.
- Home and Building Automation.
- resolution: 61 Hz.
- Supply voltage: 3.3V.
- Min. Operational temperature range: -20.
- Max. Operational temperature range: +70 °.
RF module RFM69HW-915S2
- FRF = 915 MHz.
- temperature = 25 °C.
- Supply voltage: VBAT1=VBAT2=VDD=3.3 V.
- , Bit Rate = 4.8 kb/s.
- Crystal oscillator frequency For All Module: 32MHz
RF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.
RF433 MHz Transmitter Receiver Wireless Module
- RX Receiver Frequency : 433 MHz
- RX Typical Sensitivity : 105 Dbm
- RX Supply Current : 3.5 mA
- RX IF Frequency : 1MHz
- RX Operating Voltage : 5V
- TX Frequency Range : 433.92 MHz
- TX Supply Voltage : 3V ~ 6V
- TX Out Put Power : 4 ~ 12 Dbm
RFID 13.56MHz Card-5Pcs
- Data and energy supply can be transmitted contactlessly (no battery required)
- Operating distance: Depending on the antenna’s geometry, up to 100mm
- 13.56 MHz is the operating frequency.
- Transfer of data: 106 kbit/s
- Data integrity: bit coding, bit counting, parity, and 16-bit CRC
- Preventive collision
- <100 ms is the average ticketing transaction time (including backup management)
Load more products
Loading...