Shop

Categories
Stock status
  • On backorder
Filter by price

    5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery

    Original price was: ₹309.00.Current price is: ₹235.00.
    • Voltage used for charging: 21V
    • 56 A is the charging current.
    • Current for continuous discharge: 15 A
    • 50/55/60 A overcurrent protection
    • Delay in overcurrent protection: 20/25/30 mS
    • Power consumption for a single part since: 30 uA
    • Voltage range for single section discharge detection: 2.75–2.85V
    • Voltage range for over discharge recovery: 2.90–3.20V

    5V 0.2A 3007 Cooling Fan for Raspberry Pi and 3D Printer

    Original price was: ₹141.00.Current price is: ₹99.00.
    • Ideally suited for the extruder
    • Silent Performance
    • Extremely low usage of current
    • Simple to connect to and install.

    5V 0.2A Raspberry Pi Cooling Fan

    Original price was: ₹250.00.Current price is: ₹117.00.
    • This fan can be used with all the models of Raspberry Pi 3, 2.
    • Connector: 2 pin Rated
    • Voltage: DC 5V Current: 0.2A

    5V 2A Wireless Transmitter Receiver Charging Coil Module

    Original price was: ₹800.00.Current price is: ₹672.00.
    • XKT-412 is the model.
    • 12 volts is the input voltage.
    • 5V is the output voltage.
    • 1.2-2 A is the operating current.
    • 3mm receiving coil; 5V/1A current output from the receiver
    • Usual Distance: 2 to 10 mm
    • 1.2-2 A is the operating current.

    5V 3A Raspberry Pi AC 100-240V DC 15W EU Plug USB Power Supply Adapter Charger

    Original price was: ₹400.00.Current price is: ₹299.00.
    1. This item is One DC 5V 3A 15W USB Universal external switching power adapter.
    2. Solve the problem of insufficient power supply mobile hard disk.
    3. Wide input range, high precision voltage.
    4. Input Voltage: AC100-240V
    5. Output Output: 5V
    6. Output Current: 3A

    5V 4 Channel Relay Module

    Original price was: ₹300.00.Current price is: ₹250.00.
    • 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
    • Equipped with high-current relay, AC250V 10A; DC30V 10A.
    • Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
    • Indication LED’s for Relay output status.

    Note:

    • Within India, 3 – 4 days lead time with 100% advance
    • For imports, 15 days lead time with 50% advance

    5V 8 Channel Relay Module

    Original price was: ₹460.00.Current price is: ₹399.00.
    • Driveability of the 8550 transistor.
    • bolt holes that are fixed for simple installation.
    • It features eight relay status indicator LEDs (Red), one relay status indicator led (Power LED, Green).
    • Interface for control of relays via single-chip IO.
    • High-level release, low-level suction closure.
    • Three simple lines that are easy to use.

    Note:

    • Within India, 3 – 4 days lead time with 100% advance
    • For imports, 15 days lead time with 50% advance

    5V 8W Mini Portable USB Soldering Iron Pen With Touch Switch Protective

    Original price was: ₹700.00.Current price is: ₹592.00.
    • Power: 5V DC / 8W
    • LED indicator
    • Material: Plastic, Metal
    • Colour: Black

    Note:

    • Within India, 3 – 4 days lead time with 100% advance
    • For imports, 15 days lead time with 50% advance

    5V A4178 FS4010 Brushless DC Cooling Fan with 2Pin Cable

    Original price was: ₹138.00.Current price is: ₹98.00.
    • Voltage of Brushless Cooling Fan: 5V
    • Connector: Two-pin connector

    Note:

    • Within India, 3 – 4 days lead time with 100% advance
    • For imports, 15 days lead time with 50% advance

    5V Active Alarm Buzzer Module for Arduino

    Original price was: ₹87.00.Current price is: ₹48.00.
    • Voltage range for the PCB: 3.3V to 5V
    • Measurements: L = 29 x W = 14 x H = 12 mm
    • 20 cm is the wire length.
    • 7 grammes in weight.
    • 2500 Hz is the frequency.

    5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P

    Original price was: ₹68.00.Current price is: ₹32.00.
    • 2.9V is the BAT Discharging Stop Voltage.
    • 85% of the discharge is efficient (input 3.7V, output 5V/1A).
    • indication of charging and discharging
    • Power MOS for charging and discharging embedded internally
    • 4.2V charging voltage preset, accuracy ±1%
    • Maximum 8 uA standby current Integrated charging and discharging control
    • Overheating prevention and intelligent temperature control
    • Combining short circuit, overload, and overvoltage protection in the output

    5V USB Aluminium Body Power Bank Case for 18650 Battery

    Original price was: ₹209.00.Current price is: ₹165.00.
    • Power input: 5 V DC at up to 1.5 A
    • Stabilised Output Power: 5 V DC at up to 1 A
    • Aluminium Case with Style and Compact Size.
    • Stunning powder coating in vibrant colours