Showing 3493–3504 of 4062 results
Shop
Standard Temperature 40 Watt Hot Melt Glue Gun with On/Off Switch
- Voltage: 110-220V
- Power consumption: 40W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 40 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
Standard Temperature 60Watt Hot Melt Glue Gun with On/Off Switch
- Voltage: 110-220V
- Power consumption: 60W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 60 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
STC- 3018 Dual Digital Temperature Controller Thermostat
- Display Type:Digital
- Operating Voltage: AC110-220V
- Temperature sensor: NTC 10K
- Senor length:1.0m
- Temperature measuring range: -55 ° C ~ 120 ° C
- Resolution: 0.1 ° C
- Accuracy:±1° C
STC-1000 DC12V Digital Temperature Controlled Thermostat Switch
- Mini temperature controller.
- With a clear LED display for better readability.
- Wide temperature measuring range.
- Dual heating and cooling control.
- Automatic over-temperature alarm
- Relay output.
- High Control precision 0.1 centigrade
STC-3008 DC24V Dual Display Temperature Adjustable Temperature Controller with 1M Cable
- The STC-3008 model
- Voltage Option: 24VDC
- Range of Temperature Control: 110 °C
- Dual Screen Dual Display
- Sensor: 2*NTC Sensor (about 1 metre in line length)
STC-3028 DC12V Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
- The STC-3008 model
- Voltage Option: 12VDC
- Temperature Control: 0 to 100 degrees Celsius
- Dual Screen Dual Display: Screen Display
- One NTC sensor (with a line length of roughly one metre)
Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B
- Wide 5V to 12V Operating Voltage.
- Four Brushed DC Motor Bidirectional Control.
- Two Stepper Motor Control.
- Maximum Peak Current 3A
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Thermal Shutdown Protection
Stepper Motor NEMA 34 34 Kg-Cm Hybrid Bipolar
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm
- Length: 66mm
- Weight: 1.7kg
STEPPER MOTOR NEMA 34 68 KG-CM HYBRID BIPOLAR
Rated Voltage (V) – 4.2
Current/ phase (A) – 4
Holding Torque (kg-cm) – 68
No. of Leads – 4
Length (mm) – 95
Step Angle – 1.8°
Step Angle Accuracy – ±5% (full step, no load)
Resistance Accuracy – ±10%
Inductance Accuracy – ±20%
Frame Size (mm) – 85×85
Shaft Length (mm) – 32
Shaft Diameter (mm) – 12
Stepper Motor(28YBJ-48) with ULN2003 Driver Board
- Stepper motor with Driver board
- 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board
- Voltage: DC 5V
- Phase:4step
- DC resistance: 200ohm+/-7%
- Great for DIY projects
Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker
The LED state port is connected with a 100-ohm resistor in series; LED indicates the ground connection, the Bluetooth is not connected and the flash is fast. After the Bluetooth connection is successful, it is slow flashing.
STM32 NUCLEO-F411RE STM32F411RE 512 KB Flash ARM Development Board, Cortex-M4
- Product: NUCLEO-G491RE Development Board
- Core Architecture: ARM
- Core Sub-Architecture: Cortex-M4
- Silicon Family Name: STM32
- Silicon Core Number: STM32G491RET6U FOR BULK B2B ENQUIRIES KINDLY MAIL US @ibots.in
Load more products
Loading...