Shop

Categories
Stock status
  • On sale
  • In stock
Filter by price

    N20-12V-200 RPM Micro Metal Gear Motor

    Original price was: ₹320.00.Current price is: ₹300.00.
    1. This is a DC Mini Metal Gear Motor, ideal for making robots
    2. Lightweight, high torque and low RPM.
    3. Fine craftsmanship, durable, not easy to wear.
    4. With excellent stall characteristics, can climb hills easily.
    5. You can also easily mount a wheel on the motor’s output shaft.

    N20-12V-600 Rpm Micro Metal Gear Motor

    Original price was: ₹320.00.Current price is: ₹300.00.
    1. This is a DC Mini Metal Gear Motor, ideal for making robots
    2. Lightweight, high torque and low RPM.
    3. Fine craftsmanship, durable, not easy to wear.
    4. With excellent stall characteristics, can climb hills easily.
    5. You can also easily mount a wheel on the motor’s output shaft.

    Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)

    Original price was: ₹310.00.Current price is: ₹269.00.
    1. Operating Voltage (logic level): 5V
    2. 8 analog inputs ports: A0 ~ A7
    3. Input Port: USB MINI
    4. Using Atmel Atmega328P-AU MCU
    5. Standard 0.1” spacing DIP (breadboard friendly).

    Nano CH340 Chip Board Compatible with Arduino (Soldered)

    Original price was: ₹650.00.Current price is: ₹600.00.
    • Operating Voltage (logic level): 5V
    • 8 analog inputs ports: A0 ~ A7
    • 14 Digital input / output ports: TX, RX, D2 ~ D13
    • 1 pair of TTL level serial transceiver ports RX / TX
    • Using Atmel Atmega328P-AU MCU
    • There is a bootloader installed in it
    • Standard 0.1” spacing DIP (breadboard friendly).
    • Manual reset switch.

    NEMA 17 5.5 kg-cm Stepper Motor

    Original price was: ₹1,499.00.Current price is: ₹1,299.00.
    1. Step Angle: 1.8°.
    2. Current:  1.5 A /Phase.
    3. Holding Torque: 5.5 kg-cm.
    4. Detent Torque: 2.6 kg-cm
    5. Weight – 360 gm.

    NEMA23 10.1 kg-cm Stepper Motor

    Original price was: ₹1,999.00.Current price is: ₹1,499.00.
    1. Step Angle Step Angle: 1.8 °
    2. Current: 2.8 A/Phase
    3. Holding Torque: 10.1 N-cm
    4. Detent torque: 3.6 N.cm (Maximum)
    5. Lead Wires: 4
    6. Shaft diameter: 6.35 mm

    NEO-6M GPS Module with EPROM

    Original price was: ₹475.00.Current price is: ₹400.00.
    • 5Hz position update rate.
    • The cold start time of 38 s and Hot start time of 1 s.
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
    • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
    • Separated 18 x 18mm GPS antenna.

    NEO-M8N GPS Module with Ceramic Active Antenna

    Original price was: ₹900.00.Current price is: ₹850.00.
    1. Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm.
    2. Module Size : approx. 26 x 36 x 4 (LxWxH) mm.
    3. Net weight : approx. 16 gm.
    4. Gross weight : approx. 17 gm.
    5. Mounting : approx. 3 mm.
    6. The default baud rate : 9600.
    7. Flash memory: 64KB.

    NJM4558 (JRC4558) – (SMD/SMT) Dual Operational Amplifier

    Original price was: ₹54.00.Current price is: ₹31.00.
    1. IC Name: NJM4558
    2. Package/Case: SMD-8

    NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board

    Original price was: ₹410.00.Current price is: ₹350.00.
    1. Power input: 4.5V ~ 9V (10VMAX), USB-powered
    2. Transfer rate: 110-460800bps
    3. Support UART / GPIO data communication interface
    4. Support Smart Link Smart Networking
    5. Working temperature: -40°C ~ + 125°C
    6. Drive Type: Dual high-power H-bridge
    7. Don’t need to download resetting
    8. A great set of tools to develop ESP8266
    9. Flash size: 4MByte
    10. Lowest cost WI-FI

    Noel 25W 230V Sodering Iron Model-GOLD

    Original price was: ₹238.00.Current price is: ₹170.00.

    The Noel 25W 230V Soldering Iron, Model GOLD, is a reliable tool for precise soldering tasks in electronics repair, prototyping, and hobbyist projects. Its lower wattage and fine tip make it suitable for delicate work, while its ergonomic design and durability ensure comfortable and long-lasting use. Proper maintenance will help prolong its lifespan and ensure consistent performance.

    • Brand: Noel
    • Low current leakage
    • Light Weight and Offers good grip
    • General purpose for all electronic applications.
    • Advanced Heating element
    • High-Quality Nickel-Copper plated Bit
    • Quickly attains the working temperature
    • Constant Tip temperature

    Obstacle Avoiding Robot

    Original price was: ₹4,500.00.Current price is: ₹4,250.00.